(C104TS7) Quartz Screw-Top Cuvette, 10 mm Path, 3.5 mL, Pack of 2

Weight	30 g
Dimensions	1.25 × 1.25 × 4.5 mm

SKU: C104TS7

Original price was: $266.00.Current price is: $240.00.

In Stock

C104TS7 is a JGS1 quartz screw-top cuvette with a 10 mm optical path, Two-Way Light layout and 3.5 mL nominal capacity. Its threaded neck and included PTFE cap suit covered straight-through measurements in a familiar rectangular cell format. Supplied as a pack of 2 cuvettes.

In Stock

SKU: C104TS7 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TS7 is a quartz screw-top cuvette for 10 mm path measurements with a covered sample chamber and Two-Way Light geometry. It combines JGS1 quartz, a threaded neck and 3.5 mL nominal capacity in a standard rectangular body, making it a practical choice for routine straight-through measurements where you want the sample loaded from the top and kept covered during handling. This sales unit contains 2 cuvettes.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Opening Configuration: Threaded Neck

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	3.5 mL
Cell Body Dimensions	12.5 × 12.5 × 35 mm
Overall Height without Closure	55 mm
Body Height	35 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes
Opening Configuration	Threaded Neck

Choose this option

Choose C104TS7 when your method uses a 10 mm transmission path and does not require side optical access on all four faces. The threaded neck gives direct top access for filling, and the included PTFE cap keeps the cell in a covered format for transfer and measurement setup. The pack-of-2 sale unit is useful when you want matching cells for blank and sample or a spare in the same geometry.

What makes this option different

Two-Way Light configuration for straight-through optical measurement.
10 mm optical path with 3.5 mL nominal capacity in each cell.
Threaded neck and PTFE screw cap for top filling in a covered sample format.
Pack of 2 cuvettes per priced sales unit.

Using this cell

Fill the cuvette through the neck so the sample covers the beam area used by your instrument, then fit the cap before measurement. Keep the two optical faces clean, free from droplets and fingerprints, and use a consistent orientation if your procedure compares blank and sample between the two cells.

This is a covered sample cuvette, not a pressure-rated assembly. No pressure limit is stated for this SKU.

First-use check

Inspect both cells under good light before first use, rinse with a suitable liquid for your method, and confirm that the cap threads seat properly. Before running measurements, check that the filled level covers the beam path and that no bubbles remain in the transmission area.

Fit and optical alignment

The base footprint is 12.5 × 12.5 mm, with a 35 mm body height and a 55 mm overall uncapped height including the neck. Those dimensions are the practical checks for body fit in the holder and clearance above the holder where the threaded neck extends.

Z Height is not stated for this item, so do not assume beam alignment from the outside body size alone when your instrument uses a fixed beam-center position. The 3.5 mL figure is a nominal capacity, not a minimum working volume.

Solvents and cleaning

Select your sample and cleaning routine for the complete assembly, including the quartz body and closure. Exact chemical limits are not established here for this SKU, so aggressive chemicals, extended contact and closure-contact conditions should be reviewed against your actual process before use.

For fabrication background, see the cuvette fabrication guide. Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with non-abrasive wipes.

Included with this option

One sales pack containing 2 cuvettes. A PTFE screw closure is included with this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz requirements involving dimensions, path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch together with holder or instrument information, sample conditions and target quantity. Discuss your requirements and refer to part number C104TS7.