(C014WS1) Quartz Flow Cell, 1 mm Path, 350 µL

Weight	30 g

SKU: C014WS1

Original price was: $289.00.Current price is: $261.00.

In Stock

C014WS1 is a JGS1 quartz flow cell with a 1 mm optical path, 350 µL nominal capacity and Four-Way Light geometry for fluorescence spectroscopy. Two opposed fluid tubes with 4 mm OD and 2 mm ID define the inline connection format.

In Stock

SKU: C014WS1 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C014WS1 is a JGS1 quartz flow cell for fluorescence spectroscopy with a 1 mm optical path, 350 µL nominal capacity and Four-Way Light access. Its two opposed fluid tubes give you a defined 4 mm OD / 2 mm ID connection format, making this a useful choice when both optical access and tubing size need to be set from the start.

Path Length: 1 mm
Sample Volume (Nominal): 350 µL
Opening Configuration: Two Opposed Fluid Tubes

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	Fluorescence Spectroscopy
Path Length	1 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
Material	Quartz
Material Grade	JGS1
Port Count	2
Tube Outer Diameter (OD)	4 mm
Tube Inner Diameter (ID)	2 mm
Fabrication Method	Molded 83
Opening Configuration	Two Opposed Fluid Tubes

Choose this option

Choose C014WS1 when your method is built around a short 1 mm path in an inline quartz cell rather than a larger-volume flow body. The Four-Way Light layout supports optical access from multiple sides of the sample region, and the opposed tube arrangement helps you plan straight-through bench routing or integration into an existing liquid line.

What makes this option different

1 mm optical path for short-path flow measurements.
350 µL nominal cell volume.
Four-Way Light geometry for optical access from multiple sides.
Two opposed fluid tubes with 4 mm OD / 2 mm ID dimensions.

Using this cell

Install the cell inline through the two opposed tube connections and fill gradually so the sample region wets evenly. Before measurement, inspect the illuminated area for bubbles, droplets or residue and establish your blank only after the flow path has stabilised.

The 350 µL figure is the nominal volume of the cell itself, not the total volume of connected tubing and fittings. No pressure limit is stated here, so pressurised use should be reviewed against the complete assembled circuit.

First-use check

Inspect the quartz body and both tube ends for chips, dust or residue.
Verify that your tubing and mating hardware suit the stated 4 mm OD / 2 mm ID connection format.
Run a suitable blank through the cell and confirm that the optical region is fully wetted and bubble-free.
Check holder clearance and beam position before routine use.

Fit and optical alignment

Plan enough clearance for the full installed assembly, including both tube runs, rather than only the central quartz section. The tube dimensions help with connection planning, but the external body dimensions and Z Height are not established here.

If your holder or instrument depends on a defined beam-center position or a specific installed envelope, check those points directly before ordering. Path length, nominal volume and Four-Way Light geometry do not by themselves establish holder fit.

Solvents and cleaning

Molded 83 is generally selected for quartz cells used in organic-solvent methods and in applications involving temperature control. Actual suitability still depends on the complete wetted assembly and on the liquid, concentration, temperature, exposure time and cleaning routine used in your process.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

The listed price is for one C014WS1 flow cell.

Additional accessory contents should be confirmed for your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz versions for changes to dimensions, path length, sample volume, optical access, tube size and fabrication requirements. Send a labelled drawing or sketch together with holder details, sample conditions and target quantity through the contact page and quote C014WS1.