(C012CR1) Quartz Large-Window Cuvette, 1 mm Path

Weight	30 g

SKU: C012CR1

Original price was: $285.00.Current price is: $257.00.

In Stock

C012CR1 combines a 1 mm optical path with an open-top, large-window quartz body for direct sample loading and inspection. Its narrow 36 × 1 × 48 mm internal region and slim 38 × 3 × 50 mm uncapped body suit setups that need a short transmission distance within a broad rectangular face.

In Stock

SKU: C012CR1 Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C012CR1 is a quartz cuvette with a 1 mm optical path in a slim open-top body. The Two-Way Light arrangement supports transmission measurements across the defined short path, while the long internal region and direct top access help when you need to load, inspect and clean the sample chamber from above.

Path Length: 1 mm
Cell Type: Large-Window Cuvette
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	1 mm
Light Transmission Configuration	Two-Way Light
External Dimensions	38 × 3 × 50 mm
Uncapped Cell Dimensions	38 × 3 × 50 mm
Overall Height without Closure	50 mm
External Dimensions Scope	Uncapped Cell
Internal Dimensions	36 × 1 × 48 mm
Material	Quartz
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C012CR1 when your setup needs a 1 mm path in a narrow rectangular cell rather than a standard square format. The open-top body gives direct access to the sample region, and the stated 38 × 3 × 50 mm external size with 36 × 1 × 48 mm internal dimensions helps you judge whether this body shape will sit correctly in your holder and place the sample where your beam can pass through it.

What makes this option different

1 mm optical path for methods that require a short transmission distance.
Two-Way Light configuration for transmission through two opposing optical sides.
Open-top access so you can fill, inspect and rinse the cell body directly from above.
Slim uncapped body at 38 × 3 × 50 mm, useful when holder clearance is limited in one direction.
Long internal sample region of 36 × 1 × 48 mm, giving a defined narrow chamber shape along the body length.

Using this cell

Fill the cell from the top opening and make sure the liquid level fully covers the beam path used in your instrument. Because the body is narrow, steady filling and careful bubble removal are important before measurement.

Keep the same orientation for blank and sample readings. Avoid handling the optical sides with bare fingers, and do not assume the open top provides sealing, pressure resistance or transport security.

First-use check

On receipt, inspect the body for shipping damage, rinse it with a liquid suitable for your procedure, and place it in the holder to confirm stable seating. Before running measurements, check that the filled sample covers the intended beam path and that no bubbles remain in the optical path.

Fit and optical alignment

The listed outer size applies to the uncapped cell body: 38 × 3 × 50 mm, with an overall uncapped height of 50 mm. Check slot width, side clearance, insertion depth and any clamp contact points in your holder before ordering, especially if your instrument accepts only a specific body profile.

Z Height is not stated for this SKU. The 50 mm body height should not be treated as beam-center height, so any instrument that depends on a fixed beam position from the base should be checked against your actual setup.

Solvents and cleaning

This cell is made from quartz, but specific chemical limits for this exact SKU are not stated here. Select sample and cleaning liquids according to your own chemical conditions, especially for aggressive media, elevated temperature or long contact times.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe optical surfaces gently with non-abrasive optical tissue. For general background, see this fabrication overview.

Included with this option

Confirm the cell quantity and any separately specified accessories covered by your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom quartz cuvette production for changes involving dimensions, path length, windows, Z Height, closures and other fit details. Send a dimensioned drawing or labelled sketch together with your holder or instrument information, critical dimensions, sample conditions and target quantity. Discuss your requirements and quote part number C012CR1.