(C012TS) Quartz Screw-Top Cuvette, 1 mm Path

Weight	30 g
Dimensions	1.25 × 0.35 × 4.5 mm

SKU: C012TS

Original price was: $209.00.Current price is: $189.00.

In Stock

Quartz screw-top cuvette with a 1 mm optical path and Two-Way Light configuration. This short-path format suits methods that need a capped quartz cell rather than an open sample chamber. Sold as 1 cuvette per listed price unit.

In Stock

SKU: C012TS Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C012TS is a quartz screw-top cuvette with a 1 mm optical path in a Two-Way Light format. It is a practical choice when your method needs a short optical path and you prefer sample loading through a threaded opening instead of an open-top chamber. The listed MQ sale unit is 1 cuvette per price unit.

Path Length: 1 mm
Sample Volume (Nominal): 350 µL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	1 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	350 µL
Material	Quartz
Closure Type	Screw Cap
Fabrication Method	Molded 83

Choose this option

Choose C012TS when the method is built around a 1 mm path and the way you access the sample matters as much as the optical path itself. The screw-top opening helps when you want to fill, cap and handle the cell as a closed-format cuvette during transfer and measurement, while the quartz body supports UV/Vis-style optical work that uses the main opposing light path.

What makes this option different

1 mm optical path for methods that require a short absorption path rather than a standard longer-path cell.
Two-Way Light configuration for transmission through the main opposing optical faces.
Screw-top opening for sample access through a threaded cap format instead of an open chamber.
Quartz construction for optical work where a quartz cell is specified.
Molded 83 fabrication with supplier-described optical-contact integrated construction, useful when reviewing sample and cleaning conditions for the complete assembly.
MQ price unit: 1 cuvette for this exact listed SKU.

Using this cell

Use the 1 mm path consistently in your method setup and calculations, and keep the same orientation for blank and sample. Fill the cuvette so the liquid covers the illuminated region used by your instrument, then remove visible bubbles and exterior droplets before measurement.

If your procedure involves capping the sample before reading, seat the closure the same way each time and handle the cuvette by non-optical surfaces where possible. The screw-top format describes the access style only; it should not be treated as a pressure-rated connection.

First-use check

Inspect the optical faces and sample chamber before first use.
Run a blank to confirm that the beam passes through the intended optical faces in your holder.
Check that your filling and capping routine can be carried out comfortably within the available clearance.

Fit and optical alignment

This SKU is a Two-Way Light cell, so plan alignment around the main opposing optical faces rather than side access. Z Height is not established for this selected SKU, so it should not be treated as a confirmed match for holders or instruments that depend on a specific beam-center height.

External fit dimensions are also not established here, so holder clearance and insertion depth should be checked against your own setup before ordering. This is especially important if your holder has limited top clearance around a cap or a fixed beam position.

Solvents and cleaning

Molded 83 is the listed fabrication for this cuvette, and the source describes an optical-contact integrated construction. For solvent use or stronger cleaning routines, consider the whole wetted assembly, including the closure and any sealing surfaces used in your setup, rather than the quartz body alone.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with non-abrasive optical tissue.

Included with this option

1 quartz cuvette per listed price unit. Closure inclusion is not established for this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for projects involving dimensions, optical path length, sample volume, windows or Z Height, closures and fabrication or tolerance requirements. Send your drawing or holder details, sample conditions and quantity if you need a different configuration.

Discuss your requirements and quote part number C012TS.