(C024TS) Quartz Screw-Top Cuvette, 2 mm Path, 700 µL

Weight	30 g
Dimensions	1.25 × 0.45 × 5.5 mm

SKU: C024TS

Original price was: $285.00.Current price is: $257.00.

In Stock

C024TS is a JGS1 quartz screw-top cuvette with a 2 mm optical path, Four-Way Light geometry and 700 µL nominal capacity. The threaded neck and included PTFE screw cap suit covered sample handling while keeping optical access on four sides. Supplied as 1 cuvette.

In Stock

SKU: C024TS Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C024TS is a JGS1 quartz screw-top cuvette for UV/Vis work across 200–2500 nm, with a 2 mm optical path and Four-Way Light geometry. Its 700 µL nominal capacity and capped threaded-neck format make it a useful choice when you need a compact covered cell but still want optical access from four sides of the body. It is sold as 1 cuvette.

Path Length: 2 mm
Sample Volume (Nominal): 700 µL
Opening Configuration: Threaded Neck

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	2 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	700 µL
Cell Body Dimensions	12.5 × 4.5 × 38 mm
Overall Height without Closure	54 mm
Body Height	38 mm
Overall Height with Closure	58 mm
Base Dimensions	12.5 × 4.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Molded 83
Opening Configuration	Threaded Neck

Choose this option

Choose C024TS when your method calls for a 2 mm path in a screw-top quartz cuvette rather than an open-top cell. The Four-Way Light layout is useful where side optical access matters in addition to the main transmission direction, and the threaded neck with PTFE cap gives you a covered sample chamber for handling between filling and measurement.

What makes this option different

2 mm optical path for methods specified for a short-path quartz cell.
Four-Way Light configuration with optical access on four sides.
Threaded neck with PTFE screw cap included for covered sample loading and handling.
700 µL nominal capacity in a compact rectangular body.

Using this cell

Fill the cuvette through the threaded neck and fit the supplied cap when your procedure calls for the sample to stay covered during handling or measurement. Keep the optical faces free from fingerprints, droplets and residue on the outside, and remove visible bubbles from the beam area before use.

The 700 µL value is the nominal capacity of the cell. It is not a minimum working volume, so if you plan to work below full capacity, check that the filled sample height still covers the beam path used by your instrument.

First-use check

Inspect the optical faces before first use and make sure they are clean and free from visible handling residue. Rinse with a solvent suitable for your method, run a blank in the same orientation you will use for the sample, and confirm that the liquid level covers the beam area.

Fit and optical alignment

The rectangular body is 12.5 × 4.5 × 38 mm, with a 12.5 × 4.5 mm base. Overall height is 54 mm without the cap and 58 mm with the cap fitted, which helps when checking holder slot size and the vertical clearance needed above the neck and cap.

Z Height is not stated for this SKU. If your holder or instrument depends on a defined beam-center height from the base, that dimension should be checked separately before ordering.

Solvents and cleaning

This cuvette is listed in the Molded 83 fabrication category. That category is commonly chosen for quartz cuvette work that may involve organic-solvent methods, but the exact solvent, concentration, temperature, contact time and full closure compatibility are not specified here for this assembled SKU.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Rinse with a suitable process solvent and wipe the outer optical faces gently with non-abrasive materials.

Included with this option

Supplied as 1 quartz screw-top cuvette with a PTFE screw cap included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to path length, body dimensions, sample volume, optical layout, Z Height, closure style and tolerances. Send a dimensioned drawing or labelled sketch together with your holder details and critical application requirements through our contact page, referencing C024TS.