(C301WS1) Quartz Reflectance Sample Cell

Weight	30 g

SKU: C301WS1

Original price was: $48.00.Current price is: $44.00.

In Stock

C301WS1 is a JGS1 quartz reflectance sample cell with an open-top cylindrical cup for reflectance measurements. Its 30 mm outer diameter, 30 mm uncapped body height and 2 mm wall thickness help you check holder clearance and top-access sample handling.

In Stock

SKU: C301WS1 Categories: Cuvettes, Products, Quartz Cylinder Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C301WS1 is a JGS1 quartz reflectance sample cell made as an open-top cylindrical cup for reflectance measurements. Its 30 mm outer diameter, 30 mm uncapped height and 2 mm wall thickness make it a straightforward option when you need direct access from above and a broad cylindrical body for holder planning. Supplied as 1 cell, it suits setups where the sample surface is prepared and presented in the cup itself.

Cell Type: Reflectance Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Specialized Cell
Cell Type	Reflectance Sample Cell
Measurement Mode	Reflectance Measurements
Pack Quantity	1 Piece
Overall Height without Closure	30 mm
Body Height	30 mm
Outer Diameter (OD)	30 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)
Wall Thickness	2 mm

Choose this option

Choose C301WS1 when your method benefits from an open quartz cup rather than a closed cell body. The top opening gives direct access for loading, leveling or inspecting the sample surface, while the 30 mm cylindrical body helps you check seating space in a holder or accessory. The supplier describes this version as powder-fused construction, which is a practical point to review when your sample chemistry or cleaning routine is part of the selection.

What makes this option different

Open-top cup body for direct filling and surface preparation from above.
30 mm outer diameter for checking fit in cylindrical holders and surrounding fixture space.
30 mm uncapped body height for vertical clearance and seating depth planning.
2 mm wall thickness stated for this exact cup format.
JGS1 quartz body for reflectance measurement use.
Powder-fused construction is the stated build for this open cup: load and rinse through the top, and choose cleaning conditions for the complete cup rather than assuming a chemical rating from the process name.

Using this cell

Load the sample directly into the open cup and prepare the exposed sample region as required by your reflectance method. The open format is useful when you need to place, inspect or adjust the sample from above instead of working through a sealed closure or a defined transmission path.

Because this is an open cell body, allow enough overhead space for filling tools and for viewing the sample surface during setup. If your method depends on a tightly controlled sample position, establish that position in your own holder or procedure rather than treating the body height as the optical reference.

First-use check

Inspect the quartz body for chips, residue or transit damage before first use. Then confirm that your holder accepts a 30 mm cylindrical cup and that your setup gives clear access to the open top during filling and measurement preparation.

Fit and optical alignment

For mechanical fit, use the stated outer body dimensions: 30 mm diameter and 30 mm uncapped height. These are the dimensions to compare with holder bore, seating depth and nearby clearance around the cup.

Z Height is not established for this SKU. If your instrument or accessory requires a defined beam-center height or a fixed sampling position, confirm that geometry separately before ordering.

Solvents and cleaning

This exact cell is described for contact with acids, alkalis and organic liquids, but the chemical conditions are not specified. Match the cell to your actual sample and cleaning conditions, including concentration, temperature and contact time. For general fabrication background, see Compare fabrication options.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and use a non-abrasive cleaning method suitable for the material you place in the cup.

Included with this option

The listed price is for 1 C301WS1 quartz reflectance sample cell. Confirm any required cover or additional accessories before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions related to dimensions, sample area, holder fit, optical layout or closure requirements. Send a dimensioned drawing or labelled sketch, your holder or instrument details, the sample chemistry and your target quantity. Discuss your requirements and quote part number C301WS1.