(C361WS) Quartz Reflectance Sample Cell

Weight	30 g

SKU: C361WS

Original price was: $61.00.Current price is: $55.00.

In Stock

C361WS is a JGS1 quartz reflectance sample cell with an open cylindrical top, a 36 mm outer diameter and a 25 mm body height. It suits reflectance setups that need a wider round sample cup with direct top access for loading and surface preparation. Supplied as 1 reflectance sample cell.

In Stock

SKU: C361WS Categories: Cuvettes, Products, Quartz Cylinder Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C361WS is a JGS1 quartz reflectance sample cell for reflectance measurements. This version uses an open cylindrical body with a 36 mm outer diameter and a 25 mm body height, giving you a wider round sample cup for direct loading and top-surface preparation.

The quartz body uses the supplier’s powder-fused construction and has a stated 2 mm wall thickness. The result is a straightforward open cell body for bench use, without an established closure or covered sample space.

Cell Type: Reflectance Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Specialized Cell
Cell Type	Reflectance Sample Cell
Measurement Mode	Reflectance Measurements
Pack Quantity	1 Piece
Overall Height without Closure	25 mm
Body Height	25 mm
Outer Diameter (OD)	36 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)
Wall Thickness	2 mm

Choose this option

Choose C361WS when your fixture is built around a 36 mm round body and you want direct access to the sample region from above. This format is useful when the sample needs to be placed, levelled or replaced by hand between reflectance measurements.

What makes this option different

36 mm outer diameter suits holders or stages designed around this wider cup size.
25 mm body height keeps the body relatively compact in the measurement position.
Open-top cylindrical form supports direct filling, levelling and sample inspection.
JGS1 quartz body with stated powder-fused construction and 2 mm wall thickness.

Using this cell

Load the sample from the top and prepare the exposed surface as required by your method. For powders, granules or similar materials, an even top surface is usually important for consistent presentation during reflectance work.

Because the body is open at the top, keep the cell upright during filling, transfer and measurement. If your application involves splashing, evaporation-sensitive materials or a need for covered handling, check whether this open geometry is appropriate before ordering.

First-use check

Inspect the quartz body for chips, scratches or visible contamination.
Confirm that your holder accepts a 36 mm round body and the 25 mm body height.
Place the cell in the intended measurement position and run your normal blank or reference check before routine use.

Fit and optical alignment

Check your holder or stage against the 36 mm outer diameter and the 25 mm body height. The stated height applies to the uncapped open cell body and is useful for clearance planning.

Z Height is not established for this SKU, so instruments or fixtures that depend on a defined beam-center height should be checked with your own seating arrangement. The outer dimensions help with mechanical fit, but they do not define a specific instrument match.

Solvents and cleaning

This quartz cell is described for contact with acids, alkalis and organic liquids, but exact chemical conditions are not stated. Check your actual sample and cleaning media against your own concentration, temperature and exposure time before routine use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean with a suitable non-abrasive method and handle carefully to avoid scratching the cell. For background on construction options, see Compare fabrication methods.

Included with this option

Supplied as 1 reflectance sample cell. No closure or additional accessories are established for this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and note the features that are critical to your fixture or method. Discuss your requirements.