(C321WS) Quartz Reflectance Sample Cell

Weight	30 g

SKU: C321WS

Original price was: $52.00.Current price is: $47.00.

In Stock

C321WS is a JGS1 quartz reflectance sample cell with an open cylindrical top, a 32 mm outer diameter and a 25 mm body height. This format gives direct access to the sample surface for reflectance work where you load and prepare the material from above. Supplied as 1 reflectance sample cell.

In Stock

SKU: C321WS Categories: Cuvettes, Products, Quartz Cylinder Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C321WS is a JGS1 quartz reflectance sample cell for reflectance measurements. Its open cylindrical body combines a 32 mm outer diameter with a 25 mm body height, giving you a compact round sample cup that can be filled, levelled and cleared directly from the top.

The body uses the supplier’s powder-fused quartz construction and has a stated 2 mm wall thickness. This is a simple open cell body rather than a covered or pressure-rated assembly, so it suits bench setups where the sample surface needs to remain directly accessible during preparation and measurement.

Cell Type: Reflectance Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Specialized Cell
Cell Type	Reflectance Sample Cell
Measurement Mode	Reflectance Measurements
Pack Quantity	1 Piece
Overall Height without Closure	25 mm
Body Height	25 mm
Outer Diameter (OD)	32 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top (Cell Body)
Wall Thickness	2 mm

Choose this option

Choose C321WS when your holder or stage is arranged for a 32 mm round body and you want a low-height quartz sample cup for reflectance work. The open top is useful when the sample needs manual loading or surface preparation before each reading, especially for powders, granules or other materials presented at the top of the cell.

What makes this option different

32 mm outer diameter suits fixtures designed around this round body size.
25 mm body height keeps the cell relatively compact in vertical clearance.
Open-top cylindrical form gives direct access for filling, levelling and visual inspection.
JGS1 quartz body with stated powder-fused construction and 2 mm wall thickness.

Using this cell

Load the sample from the top and prepare the exposed surface according to your method. For loose or uneven materials, level the top surface carefully so the presented area is consistent from run to run.

Because the cell is open, it is best used upright in a stable holder or stage. If your method involves liquids, slurries or volatile materials, make sure this open geometry fits the way you need to fill, handle and measure the sample.

First-use check

Inspect the rim and body for chips, scratches or residue before use.
Confirm that your holder accepts a 32 mm round body and the 25 mm body height.
Seat the cell in the measurement position and run your normal blank or reference routine before routine testing.

Fit and optical alignment

Check your holder opening and seating area against the 32 mm outer diameter. The stated 25 mm height applies to the uncapped open body, so it helps with vertical clearance planning but does not establish beam position.

Z Height is not established for this SKU. If your instrument depends on a defined beam-center height or a specific seating depth, confirm that relationship in your own holder rather than relying on the outer dimensions alone.

Solvents and cleaning

This quartz cell is described for contact with acids, alkalis and organic liquids, but exact chemical conditions are not stated. Match your sample and cleaning media to your own concentration, temperature and exposure time before routine use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean with a suitable non-abrasive method and handle carefully to avoid scratching the working surfaces. For background on construction options, see Compare fabrication methods.

Included with this option

Supplied as 1 reflectance sample cell. No closure or additional accessories are established for this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that matter to your setup. Discuss your requirements.