(C50.82CS1) Quartz Colorimetric Cuvette, 50.8 mm Path, 30 mL

Weight	100 g

SKU: C50.82CS1

Original price was: $95.00.Current price is: $86.00.

In Stock

C50.82CS1 is a quartz colorimetric cuvette with a 50.8 mm optical path, 30 mL nominal capacity and an open-top body for direct filling. This format suits colour-comparison work that needs a longer path in a rectangular cell body. Supplied as 1 cuvette.

In Stock

SKU: C50.82CS1 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C50.82CS1 is a quartz colorimetric cuvette for colour measurement setups that use a 50.8 mm optical path. Its open-top body gives you direct access for filling and rinsing, while the 30 mL nominal capacity suits methods that work with a larger sample fill instead of a compact micro-format cell.

The rectangular body is 54.8 × 20 × 40 mm. That body size matters as much as the path length when you are checking holder fit, surrounding clearance and beam position in a comparator or other colorimetric setup.

Path Length: 50.8 mm
Sample Volume (Nominal): 30 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Colorimetric Cuvette
Measurement Mode	Colorimetry
Pack Quantity	1 Piece
Path Length	50.8 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	30 mL
External Dimensions	54.8 × 20 × 40 mm
Cell Body Dimensions	54.8 × 20 × 40 mm
External Dimensions Scope	Body Only
Body Height	40 mm
Base Dimensions	54.8 × 20 mm
Material	Quartz
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C50.82CS1 when your method is built around a 50.8 mm transmission path and you need a straightforward open-top cell rather than a flow or ported design. It is a practical option for manual filling, direct emptying and routine rinsing, with a body format you can check against your holder before ordering.

What makes this option different

50.8 mm optical path for methods that require this longer transmission distance.
30 mL nominal capacity for sample fills that are larger than compact cuvette formats.
Open-top access for direct filling, pouring out and manual cleaning.
54.8 × 20 × 40 mm body size to check holder seating and clearance before purchase.

Using this cell

Fill the cell from the top and make sure the sample covers the beam during measurement. If your procedure depends on consistent orientation, keep the same face direction for blank and sample runs.

Pour out the sample promptly after use and rinse the cell according to the liquid used in your process. Handle the cuvette by the outer body surfaces rather than the optical faces to help keep the light path clean.

First-use check

Before routine use, inspect the optical faces for transit marks, dust or residue. Then place the empty cell in the holder to check seating, and run a suitable blank to confirm that the beam passes cleanly through the filled sample region without visible bubbles.

Fit and optical alignment

The listed 54.8 × 20 × 40 mm dimensions apply to the body only. Check that your holder accepts this rectangular format and that there is enough clearance around the top opening for filling and handling.

Z Height is not specified for this item. If your instrument has a fixed beam position or a tight holder geometry, check beam alignment requirements before ordering rather than selecting on assumed beam-center height.

Solvents and cleaning

This cuvette uses quartz as the cell material. For background on cuvette construction options, see Compare fabrication options.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods, and choose a cleaning routine that matches the actual sample chemistry used in your work.

Included with this option

Supplied as 1 cuvette. No closure or additional accessory is specified for this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application.

Discuss your requirements and quote part number C50.82CS1.