(C502CS6) Quartz High-Capacity Cuvette, 50 mm Path, 125 mL

Weight	100 g

SKU: C502CS6

Original price was: $179.00.Current price is: $162.00.

In Stock

C502CS6 is a JGS1 quartz high-capacity cuvette with a 50 mm optical path, a 125 mL nominal capacity and an open-top chamber supplied with a lid. Its Two-Way Light layout is suited to UV/Vis transmission measurements that use a large square sample region rather than a small analytical cell. Sold as 1 cuvette.

In Stock

SKU: C502CS6 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C502CS6 is a JGS1 quartz high-capacity cuvette for UV/Vis work with a 50 mm optical path and a 125 mL nominal capacity. Its large 50 × 50 × 53 mm internal chamber suits methods that need a long transmission path through a substantially larger filled sample region, while the open top and supplied lid let you fill the cell directly and then cover it for handling or measurement.

Path Length: 50 mm
Sample Volume (Nominal): 125 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	High-Capacity Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	50 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	125 mL
External Dimensions	54 × 54 × 55 mm
Cell Body Dimensions	54 × 54 × 55 mm
External Dimensions Scope	Body Only
Internal Dimensions	50 × 50 × 53 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Opening Configuration	Open Top

Choose this option

Choose C502CS6 when your method calls for a 50 mm transmission path and a large square chamber rather than a compact cuvette format. The open-top access is practical for direct filling, rinsing and inspection, and the supplied lid covers the opening after loading. This version is intended for Two-Way Light transmission measurements through two opposing optical faces.

What makes this option different

50 mm optical path for methods written around a longer transmission distance.
125 mL nominal capacity with a 50 × 50 × 53 mm internal chamber for larger sample fills.
Open-top chamber with lid so you can pour or pipette directly into the cell, then cover the opening for handling or measurement.
Two-Way Light layout for direct transmission through opposing optical faces rather than side-access optical geometries.
Fused integrated construction as the supplier’s construction term, paired with the wide top opening for straightforward rinsing and routine cleaning of the sample chamber.
54 × 54 × 55 mm body size in a square format that should be checked against holder width, depth and top clearance requirements.

Using this cell

Fill the chamber from the top so the liquid covers the beam path used by your instrument. After filling, remove visible bubbles from the optical region and place the lid as needed for your handling or measurement setup.

The wide square opening is useful when the sample is added by direct pouring or larger-volume pipetting. Keep the same face orientation for blank and sample if your method depends on a fixed optical alignment.

First-use check

Inspect the optical faces, top opening and lid for dust, chips or handling marks before first use. Rinse the chamber with a liquid suitable for your method, then place the empty cell in the holder to confirm seating and clearance before loading a full sample.

Fit and optical alignment

The listed 54 × 54 × 55 mm dimensions describe the body only. They do not include the lid, so check the available height in your holder or instrument compartment if you plan to measure with the cell covered.

Z Height is not listed for this SKU. If your instrument uses a fixed beam position, confirm beam height against your holder or fixture instead of relying on the overall body size alone.

Solvents and cleaning

This cuvette uses JGS1 quartz with a supplier-described fused integrated construction. In ordinary use, that construction is paired with the open-top chamber for direct rinsing and cleaning of the sample space after filling and measurement.

A detailed chemical compatibility list is not established for this exact option, so aggressive chemicals, heated conditions and long contact times should be reviewed for the full wetted assembly before use. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Wipe the optical faces gently with non-abrasive optical tissue. For general background, see fabrication methods of cuvettes.

Included with this option

This listing is for one C502CS6 cuvette supplied with a lid.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need different dimensions, path length, chamber size or other fitting details, we can review a custom JGS1 quartz version. Send a drawing or labelled sketch, your holder or instrument details, and your sample conditions through the contact page, and reference C502CS6.