(C504CR1) Quartz Rectangular Sample Cell, 50 mm Path

Weight	100 g

SKU: C504CR1

Original price was: $237.00.Current price is: $214.00.

In Stock

C504CR1 is a JGS1 quartz rectangular sample cell with a 50 mm optical path, Four-Way Light geometry and an open-top chamber for direct filling from above. Its large 50 × 50 × 53 mm internal sample region suits methods that need a broad liquid chamber rather than a narrow cuvette body. Sold as 1 cell.

In Stock

SKU: C504CR1 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C504CR1 is a JGS1 quartz rectangular sample cell for UV/Vis work with a 50 mm optical path, Four-Way Light geometry and an open-top chamber. The square body gives you direct top access for filling, rinsing and visual checking, while the large internal sample region helps when your setup uses a broad liquid chamber instead of a slim cuvette format.

This version uses a supplier-described fused integrated construction and a 2 mm wall thickness. In practical use, that means the chamber is intended as a rigid open quartz body for bench filling and rinsing rather than a capped or pressure-handled assembly.

Path Length: 50 mm
Cell Type: Rectangular Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	50 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
External Dimensions	54 × 54 × 55 mm
Cell Body Dimensions	54 × 54 × 55 mm
External Dimensions Scope	Body Only
Body Height	55 mm
Internal Dimensions	50 × 50 × 53 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Open Top
Opening Configuration	Open Top (Cell Body)
Wall Thickness	2 mm

Choose this option

Choose C504CR1 when your method is built around a 50 mm path and you want easy top access to a large rectangular sample region. The open chamber is convenient for loading bulk liquid samples and rinsing between runs, and the Four-Way Light layout supports optical access around the body for setups that do not rely on a single front-only viewing direction.

What makes this option different

50 mm optical path for methods specified around this longer path length.
Four-Way Light geometry for optical access around the cell body, not just one opposing direction.
Open-top chamber for direct filling, pouring out and manual rinsing from above.
Large internal dimensions of 50 × 50 × 53 mm for a broad sample region.
54 × 54 × 55 mm outer body size, which needs more holder and compartment clearance than a narrow cuvette body.
Supplier-described fused integrated construction with 2 mm walls, suited to routine handling of an open quartz cell body.

Using this cell

Fill the sample from the top and make sure the liquid level covers the beam region used by your instrument. Before reading, remove visible bubbles from the optical area and keep a consistent orientation if your method depends on repeatable alignment between blank and sample.

The open top is useful for direct access during loading, rinsing and inspection. It is not a sealed design, so if your procedure depends on a cover, controlled evaporation or closed-system handling, that arrangement needs to be planned separately.

First-use check

Inspect the optical faces, upper rim and chamber interior for chips, dust or residue.
Test fit the empty cell in your holder and check the beam position through the intended measurement region.
Rinse with a suitable liquid for your method before first use.
Run a blank first to confirm orientation, fill level and bubble control.

Fit and optical alignment

The stated outer dimensions apply to the cell body only: 54 × 54 × 55 mm. Use these body dimensions to check holder seating, compartment width and overhead clearance before ordering.

The internal chamber is 50 × 50 × 53 mm. That helps you plan how the sample will be introduced and how much room you have above the liquid surface, but it does not establish a minimum working fill. Z Height is not specified for this SKU, so body size and Four-Way Light geometry alone do not establish instrument compatibility.

Solvents and cleaning

This quartz cell is intended for UV/Vis use. For general background on cuvette construction styles, see Compare fabrication options.

The supplier describes this version as fused integrated construction. For day-to-day handling, that makes it a practical choice when you want an open quartz chamber that can be filled and rinsed directly, without relying on an added closure system as part of normal use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with non-abrasive optical tissue, and check sample and cleaning liquids carefully if your process involves aggressive chemistry, since chemical limits for this exact assembly are not established here.

Included with this option

Sold as 1 cell per pack. An included closure is not established for this open-top version, and other package contents are not specified here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, chamber geometry, openings and related build details. Send a dimensioned drawing or labelled sketch together with holder information, critical dimensions, application wavelength range and sample conditions. Discuss your requirements and quote part number C504CR1.