(C504CR2) Quartz Rectangular Sample Cell, 50 mm Path

Weight	100 g

SKU: C504CR2

Original price was: $223.00.Current price is: $201.00.

In Stock

C504CR2 is a JGS1 quartz rectangular sample cell with a 50 mm optical path, Four-Way Light access and an open-top chamber for direct filling from above. Its broad 50 × 50 × 23 mm internal sample region and low 25 mm body height suit UV/Vis work where you need a wide optical area in a shallow body. Sold as 1 cell.

In Stock

SKU: C504CR2 Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C504CR2 is a JGS1 quartz rectangular sample cell for UV/Vis spectroscopy with a 50 mm optical path, Four-Way Light geometry and an open-top body. Its broad internal sample region and low 25 mm body height make it useful when you need side optical access together with simple top loading and limited vertical clearance above the holder.

This cell uses a square, shallow body rather than a tall narrow format. That layout can be helpful for direct filling, rinsing and visual inspection at the bench, while the 50 mm path supports methods built around a longer light path through the sample.

Path Length: 50 mm
Cell Type: Rectangular Sample Cell
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	50 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
External Dimensions	54 × 54 × 25 mm
Cell Body Dimensions	54 × 54 × 25 mm
External Dimensions Scope	Body Only
Body Height	25 mm
Internal Dimensions	50 × 50 × 23 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Open Top
Opening Configuration	Open Top (Cell Body)
Wall Thickness	2 mm

Choose this option

Choose C504CR2 when your setup needs a 50 mm path in a low-profile rectangular cell with optical access on four sides. The open top gives direct access to the sample region for filling and rinsing, and the broad body helps when your fixture or workflow suits a shallow chamber rather than a taller cell.

What makes this option different

50 mm optical path for methods designed around a longer path through the sample.
Four-Way Light layout with side optical access on all four sides of the cell body.
Open-top chamber for direct loading, rinsing and viewing from above.
Broad 50 × 50 × 23 mm internal sample region instead of a narrow internal chamber.
Low 25 mm body height, which can help where space above the holder is limited.
Body dimensions of 54 × 54 × 25 mm for checking holder footprint and surrounding clearance.
Supplier-described fused integrated construction as the stated construction wording for this cell family.

Using this cell

Load the sample from the top and fill to a level that covers the beam region used by your instrument or fixture. The open chamber makes it easier to rinse between runs and to inspect the liquid surface and any visible bubbles before measurement.

Keep the cell orientation consistent if your method depends on repeatable alignment. Because this is an open-top body, it should be selected for use patterns that suit direct access from above rather than a stated sealed or pressure-rated arrangement.

First-use check

Inspect the optical faces and rim for chips, dust or residue.
Place the empty cell in the holder and check seating, side clearance and access from above.
Rinse with a suitable liquid for your method before first use.
Run a blank to confirm beam coverage, alignment and bubble removal.

Fit and optical alignment

The stated external dimensions are for the body only: 54 × 54 × 25 mm. Check the holder footprint, side clearance and the space available above the stage, especially if your fixture is closely fitted around the outside of the cell.

The internal chamber is 50 × 50 × 23 mm, which helps you judge sample-region width and approximate fill depth in relation to your beam path. Z Height is not stated for this SKU, so beam-center fit should be checked in your own holder or instrument rather than assumed from the overall body size.

Solvents and cleaning

This quartz cell is used here for UV/Vis work. For general construction background, see Compare fabrication options.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. If your sample or cleaning routine involves aggressive chemicals or elevated temperature, check suitability carefully, because chemical limits for this exact assembly are not established here.

Included with this option

1 rectangular sample cell, SKU C504CR2.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, optical windows, chamber geometry and related build details. Send a dimensioned drawing or labelled sketch together with holder or instrument information, critical dimensions, sample conditions and target quantity. Discuss your requirements and quote part number C504CR2.