(MQQSC029) Quartz Screw-Top Cuvette, 5 mm path, Large Screw Opening
$317.00
JGS1 quartz screw-top cuvette MQQSC029 combines a 5 mm optical path, Four-Way Light geometry and an M10 screw opening for UV/Vis work. Its nominal capacity is 1750 µL, and this listing is supplied as 1 piece with an accompanying closure.
In Stock
Description
MQQSC029 is a JGS1 quartz screw-top cuvette for UV/Vis measurements with a 5 mm optical path, Four-Way Light geometry and an M10 screw opening. It suits methods that need a shorter path length in a closed cuvette format, with direct top access for filling and re-closing. This listing is supplied as 1 piece with an accompanying closure.
- Path Length
- 5 mm
- Sample Volume (Nominal)
- 1.75 mL
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 5 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.75 mL |
| Body Height | 38 mm |
| Overall Height with Closure | 58 mm |
| Base Dimensions | 12.5 × 7.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Closure Included | Yes |
| Port Thread | M10 |
| Fabrication Method | Molded 0.01 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQSC029 when your method is built around a 5 mm path and you want a screw-cap cell instead of an open-top chamber. The M10 opening gives you a defined closure format for filling, capping and reopening the cell, while the Four-Way Light layout supports optical access from multiple sides. Its 1750 µL nominal capacity fits routine UV/Vis work in a compact screw-top quartz cell.
What makes this option different
- 5 mm optical path for methods written around a shorter cuvette path length.
- Four-Way Light configuration for optical access on four sides of the cell body.
- M10 screw opening with closure included for direct top filling and re-closing.
- Molded 0.01 fabrication in a JGS1 quartz screw-top cell format.
Structure and dimensions
Using this cell
Fill the cell through the screw opening, then fit the closure before measurement if your method requires the cell to be closed. Keep the same orientation for blank and sample runs, and make sure the liquid level covers the illuminated region used by your instrument.
Remove bubbles before reading, especially if you are working near the upper part of the sample region. Wipe exterior optical faces carefully so droplets, fingerprints and residue do not sit in the beam path.
First-use check
- Inspect the quartz faces and sample chamber for chips, residue or packing debris.
- Seat the cell in the holder and verify beam position with a suitable blank.
- Confirm that the cap can be fitted and removed without hitting the holder or compartment cover.
Fit and optical alignment
View the English selection reference.
The base dimensions are 12.5 × 7.5 mm. The optical body height is 38 mm, and the overall height with the cap fitted is 58 mm, so leave enough vertical clearance to remove and refit the closure inside your holder or sample compartment.
Z Height is not established for this SKU, so beam position should be checked against your instrument and holder rather than assumed from the overall cell height. The M10 thread is the closure connection for this cuvette; it is not presented here as a pressure-rated fitting.
Solvents and cleaning
Molded 0.01 is the option to consider when your method calls for closely specified optical-path precision. For the 5 mm path on this cell, agree the required tolerance and measurement conditions for the order.
If your method involves solvents, heated samples or specific cleaning agents, check the suitability of the complete assembly, including the closure, because the chemical limits for this exact SKU are not established here.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive laboratory tissue or another suitable non-scratching material.
Included with this option
1 Quartz Screw-Top Cuvette and an accompanying closure. The listed price is for 1 piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send your drawing or holder details, sample conditions, quantity and delivery destination through our contact page, and include SKU MQQSC029 for reference.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.
You may also like…
Related products
14%
(MQC383) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.6×0.6mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.15%
(MQC362) Quartz Capillary Tubes (Square), Outer Dim.: 0.5×0.5mm, Inner Dim.: 0.3×0.3mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.11%
(MQC361) Quartz Capillary Tubes (Square), Outer Dim.: 0.5×0.5mm, Inner Dim.: 0.3×0.3mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.15%
Reviews
There are no reviews yet.