(MQQFL049) Quartz Reflectance Sample Cell, 5 × 36 mm Groove, 0.5 mm Deep
Description
MQQFL049 is a JGS1 quartz reflectance sample cell for methods that use an exposed sample area instead of a sealed liquid chamber. The rectangular 5 × 36 mm groove gives you a defined place to spread or place a solid or powder sample, while the 0.5 mm depth keeps the sample presentation close to the plate surface for reflectance work and solid or powder fluorescence setups.
The narrow 61 × 7 × 2.5 mm body is a plate-style format rather than a standard cuvette block. Support the plate along suitable seating areas and align the illuminated region with the groove.
- Cell Type
- Reflectance Sample Cell
- Opening Configuration
- Open Sample Groove
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Reflectance Sample Cell |
| Measurement Mode | Reflectance Measurements; Solid/Powder Fluorescence |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| External Dimensions | 7 × 2.5 × 61 mm |
| External Dimensions Scope | Body Only |
| Material | Quartz |
| Material Grade | JGS1 |
| MQ Grade | Molded 83 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Open Sample Groove |
| Slot Depth | 0.5 mm |
| Slot Width | 5 mm |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFL049 when you need a long, narrow sample recess on a quartz plate and you want direct access to the sample surface during loading and inspection. This format is useful when your method depends on placing material across an open polished groove rather than filling a closed chamber, and when your fixture is designed to support a slim plate body.
What makes this option different
- Open rectangular groove: the sample area is an exposed 5 × 36 mm recess for direct placement of solid or powder samples.
- Shallow groove depth: the 0.5 mm figure describes the groove depth only, not a transmission path length or liquid-cell capacity.
- Slim plate body: the 61 × 7 × 2.5 mm body suits fixtures that support a narrow plate rather than a full cuvette block.
- JGS1 quartz format: suited to the listed reflectance and solid or powder fluorescence applications for this sample-cell style.
Using this cell
Load the sample directly into the polished groove and keep the presentation method consistent between runs. For powders or loose solids, spread the material as evenly as your method requires so the exposed area seen by the instrument remains repeatable.
This is an open sample groove, not a sealed sample chamber. It should be selected for surface presentation and reflectance-style use, not as a fixed-path transmission cuvette, and no minimum working volume is specified.
First-use check
- Inspect the groove and outer faces for chips, scratches or residue.
- Place the cell in the holder and confirm stable support without rocking or point loading.
- Run your blank, background or reference routine using the same orientation and sample placement method planned for measurement.
Fit and optical alignment
Check the body size and support method in your holder before ordering. The dimensions shown are for the body only, and the plate should be supported in a way that avoids bending or concentrated clamping stress across the narrow format.
Z Height is not specified for this cell. If your method depends on a defined beam position, confirm how the beam footprint sits over the 5 × 36 mm groove in your actual fixture rather than assuming fit from the outer size alone.

Solvents and cleaning
Molded 83 is the MQ fabrication option generally selected for organic-solvent methods or temperature-controlled work. In this open solid-sample format, consider residues from sample preparation as well as groove cleaning; review the liquid, concentration, temperature and contact time for your procedure.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean the polished groove gently with non-abrasive materials if your procedure leaves residue on the sample surface.
Included with this option
1 reflectance sample cell. The listed price is for one cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We can review custom JGS1 quartz versions if you need changes to the plate size, groove geometry or other installation-related dimensions. Send a drawing or labelled sketch together with fixture details, beam size, sample type and quantity requirements.
Send a product-selection enquiry with SKU MQQFL049 and your application details.
Design notes for this configuration: Shallow-Groove Quartz Plate: Presenting a Powder Surface (MQQFL049)
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.