(MQQFC094) Quartz Flow Cell, 20 mm Path, 320 µL, 15 mm Z Height
$341.00
JGS1 quartz flow cell with a 20 mm optical path, 320 µL nominal capacity and a 15 mm base-to-beam-centre height. Its 4 × 4 mm optical window is separate from the twin top quartz tubes, sized at 3 mm OD / 1 mm ID. Standard 80 adhesive-bonded construction for room-temperature aqueous samples and buffers; one cell supplied.
Description
MQQFC094 is a JGS1 quartz flow cell for UV/Vis measurements with a 20 mm optical path and 320 µL nominal capacity. Its 15 mm Z Height, 4 × 4 mm window and two top quartz tube connections make it a useful choice when beam position, optical window size and tubing access all need to be planned together in a compact cell.
- Path Length
- 20 mm
- Sample Volume (Nominal)
- 320 µL
- Opening Configuration
- Two Top Fluid Connections
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 20 mm |
| Light Transmission Configuration | Two-Way Light |
| Z Height | 15 mm |
| Optical Window Dimensions | 4 × 4 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 320 µL |
| External Dimensions | 22.5 × 12.5 × 45 mm |
| Cell Body Dimensions | 22.5 × 12.5 × 35 mm |
| External Dimensions Scope | Installed Assembly |
| Body Height | 35 mm |
| Base Dimensions | 22.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 3 mm |
| Tube Inner Diameter (ID) | 1 mm |
| Fabrication Method | Standard 80 |
| Opening Configuration | Two Top Fluid Connections |
| Fitting Material | Quartz |
| Port Layout | Top connection at the left in the referenced original; Top connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose this cell when your setup needs a 20 mm flow path with top-entry tubing and a defined beam-center height. The 15 mm Z Height is a key fit point for holders and optical alignment, while the 4 × 4 mm window and 3 mm OD / 1 mm ID quartz tubes help you judge both beam clearance and fluid connection size before ordering.
What makes this option different
- 15 mm Z Height: beam-center height is stated for holder and optical alignment planning.
- 20 mm optical path: suited to methods built around this transmission length.
- 320 µL nominal capacity: a compact flow-cell volume in a small body format.
- Two top quartz tube connections: 3 mm OD and 1 mm ID with tubing routed above the cell body.
- 4 × 4 mm window: a defined optical window size for beam-fit checks.
Using this cell
Install the cell so the optical faces stay clean and the tubing does not pull on the body. Fill gradually and watch the illuminated region for trapped bubbles, since bubbles or droplets in the beam path can disturb the baseline.
After the circuit is filled, run your blank under the same flow and connection conditions you will use for the sample. The 320 µL figure is the nominal cell volume, not a stated minimum working fill, and no pressure rating is listed for this item.
First-use check
- Inspect the optical faces and tube ends for chips, residue or shipping contamination.
- Place the cell in the holder and verify that the beam aligns with the 15 mm optical centre.
- Fill with a suitable blank, remove visible bubbles and confirm a stable baseline before running samples.
Fit and optical alignment
View the English selection reference.
The base is 22.5 × 12.5 mm, the body height is 35 mm, and the shown 45 mm overall height includes the fixed top tube arrangement. Check holder depth, the 15 mm beam-center height, and the space needed above the cell for tubing and bend radius.
Two opposing optical faces provide the transmission measurement direction. The two top tubes are fluid connections, not additional optical paths. Match your instrument beam position to the stated Z Height rather than assuming compatibility from outside size alone.

Solvents and cleaning
Standard 80 uses adhesive-bonded quartz construction and is generally selected for room-temperature water-based samples and buffer solutions. Avoid organic sample solvents and organic cleaning agents on this bonded assembly. If your method involves aggressive liquids, heat or long contact time, discuss a suitable alternative construction before ordering.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods, and wipe the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Flow Cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving path length, cell volume, body dimensions, window layout, Z Height and connection details. Send a dimensioned drawing or holder information together with your sample chemistry, contact time and target quantity.
Prototype batches typically involve 2–4 cells, with feasibility, final specifications, price and production time confirmed for the project quotation. Send a product-selection enquiry and include SKU MQQFC094.
Additional information
| Weight | 100 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.