Site Navigation

(MQQFC087) Quartz Flow Cell, 10 mm Path, 650 µL, 15 mm Z Height

Weight325 g
SKU: MQQFC087

$216.00

In Stock

JGS1 quartz flow cell with a 10 mm optical path, 650 µL nominal capacity and a 15 mm base-to-beam-centre height. The 6.5 × 10 mm optical window sits below two top fluid connections; the body is 45 mm high and the fixed cell is 56 mm high. Standard 80 adhesive-bonded construction for room-temperature aqueous samples and buffers; one cell supplied.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC087 is a JGS1 quartz flow cell for UV/Vis measurement with a 10 mm optical path, 650 µL nominal capacity and two opposing optical faces geometry. Its compact body, 15 mm Z Height and two top fluid connections make it a practical choice when you need a defined beam position without using side-entry tubing.

Path Length
10 mm
Sample Volume (Nominal)
650 µL
Opening Configuration
Two Top Fluid Connections

Selection Specifications

Product KindFlow Cell
Cell TypeFlow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length10 mm
Light Transmission ConfigurationTwo-Way Light
Z Height15 mm
Optical Window Dimensions6.5 × 10 mm
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)650 µL
External Dimensions12.5 × 12.5 × 56 mm
Cell Body Dimensions12.5 × 12.5 × 45 mm
External Dimensions ScopeInstalled Assembly
Body Height45 mm
Base Dimensions12.5 × 12.5 mm
MaterialQuartz
Material GradeJGS1
Port Count2
Fabrication MethodStandard 80
Opening ConfigurationTwo Top Fluid Connections
Port LayoutTop connection at the left in the referenced original; Top connection at the right in the referenced original
Pack Quantity1 Piece
Package Contents1 × Quartz Flow Cell

Choose this option

Choose this cell when your setup is built around a 10 mm flow path and a 15 mm beam-center height from the base. The top-connection layout is useful where side clearance is limited around the optical body, while the 6.5 × 10 mm window gives a clear optical area for UV/Vis transmission work.

What makes this option different

  • 10 mm optical path for standard through-beam UV/Vis flow measurements.
  • Two top fluid connections keep tubing access above the cell rather than to the sides.
  • 15 mm Z Height helps you match the beam position to your holder or optical bench.
  • 6.5 × 10 mm optical window in a compact body supports alignment in a small footprint.

Using this cell

Install the cell with the body supported during connection so the tubing does not place load on the optical section. Fill gradually and check that the optical region is fully wetted before you take a blank or sample reading.

The 650 µL figure is the nominal cell capacity. If your setup includes extra tubing or fittings, plan rinsing and sample changeover around the full assembled liquid path rather than the cell body alone.

First-use check

  1. Inspect the optical faces and connection points before installation.
  2. Check holder fit and beam alignment using the 15 mm Z Height.
  3. Fill slowly and confirm that the illuminated region is free of bubbles before measurement.

Fit and optical alignment

View the English selection reference.

The body measures 12.5 × 12.5 × 45 mm; the fixed cell including its top connections is 56 mm high. Use the 15 mm Z Height as the key alignment value, and leave enough vertical space above the cell for your tubing and connection hardware.

Pressure limits are not specified for this SKU. Set operating limits from the complete assembled line, including fittings and tubing, rather than from the cell body alone.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell uses Standard 80 adhesive-bonded quartz construction. It is suited to room-temperature water-based samples and buffer systems. Avoid organic sample solvents and organic cleaning agents on this bonded assembly. For an organic-solvent method, review a suitable alternative construction before ordering.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. For aggressive liquids, heated use or long contact times, please review the full liquid conditions before use.

Included with this option

1 Quartz Flow Cell. The listed price is for one cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for changes to path length, body dimensions, window size, Z Height, connections and tolerance requirements. Send your drawing or holder details, sample conditions and quantity through the contact page and reference MQQFC087.

Additional information

Weight325 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC087) Quartz Flow Cell, 10 mm Path, 650 µL, 15 mm Z Height”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare