Site Navigation

(MQQFC039) Quartz Rectangular Sample Cell, 0.5 mm Path, 130 µL, Open at Both Ends

Weight50 g
SKU: MQQFC039

$359.00

In Stock

Quartz rectangular sample cell with a 0.5 mm optical path, Two-Way Light access and 130 µL nominal capacity. Its long, slim open-at-both-ends JGS1 quartz body suits custom mounting where a very short transmission path is needed in a narrow 7 × 2.5 × 53 mm envelope. Sold as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC039 is a JGS1 quartz rectangular sample cell for UV/Vis work from 200 to 2500 nm. It combines a 0.5 mm optical path with Two-Way Light access in a long, narrow open-ended body, which is useful when your setup needs a very short transmission path but cannot use a standard finished cuvette format. The nominal capacity is 130 µL, with a 5 × 0.5 × 53 mm internal chamber inside a 7 × 2.5 × 53 mm exterior.

View the English selection reference. Group photographs in the gallery may show related options in the series.

Path Length
0.5 mm
Sample Volume (Nominal)
130 µL
Opening Configuration
Open at Both Ends

Selection Specifications

Product KindSpecialized Cell
Cell TypeRectangular Sample Cell
Measurement ModeTransmission Spectroscopy
Path Length0.5 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)130 µL
External Dimensions7 × 2.5 × 53 mm
Body Height53 mm
Base Dimensions7 × 2.5 mm
Internal Dimensions5 × 0.5 × 53 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodMolded 83
Opening ConfigurationOpen at Both Ends
Pack Quantity1 Piece

Choose this option

Choose this model when your method requires a 0.5 mm path and optical access through one opposed face pair only. The long, slim body is useful for custom holders or built-in assemblies where the outer envelope is tight but the sample still needs a defined rectangular chamber in an open-ended format.

What makes this option different

  • 0.5 mm optical path for very short-path transmission measurements.
  • Two-Way Light configuration for optical access through one opposed face pair.
  • 130 µL nominal capacity with a 5 × 0.5 × 53 mm internal chamber.
  • 7 × 2.5 × 53 mm exterior for slim holder layouts and custom integration.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

This is an open-ended sample body, so the sample must be retained by your own holder, sealing method or surrounding assembly. Before routine use, plan how the chamber will be filled, how bubbles will be cleared and how the two open ends will be managed during measurement.

Align the beam through the intended transmitting faces and keep the same orientation between blank and sample. The stated 130 µL is the nominal chamber volume, not a guaranteed minimum working volume in a completed installed setup.

First-use check

  1. Inspect the optical faces, edges and internal channel for chips, dust or residue.
  2. Check that the holder supports the body securely before adding sample.
  3. Run a blank and confirm filling, emptying and bubble control in the intended orientation.

Fit and optical alignment

Use the 7 × 2.5 × 53 mm body dimensions to check fixture clearance, and use the 5 × 0.5 × 53 mm internal dimensions only for the sample region itself. Because the body is long and narrow, stable support along the fixture is important; avoid local clamping pressure on the optical faces or end edges.

Z Height is not specified for this SKU. If your instrument has a fixed beam position, verify beam alignment in the actual holder rather than inferring it from overall body height.

English selection reference
Selection reference ↗

Solvents and cleaning

Molded 83 is the MQ fabrication designation for this optical-contact quartz construction. It is a suitable selection direction for methods involving organic solvents or temperature, while suitability still depends on the complete assembly and actual liquid conditions.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. If your method includes aggressive liquids, prolonged contact time or added seals and fittings, please send the full conditions for review before ordering.

Included with this option

1 rectangular sample cell, SKU MQQFC039. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz projects involving path length, external envelope, nominal volume, optical access, Z Height and end-interface design. Send your drawing or holder details, sample conditions, required quantity and delivery target through this contact page.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC039) Quartz Rectangular Sample Cell, 0.5 mm Path, 130 µL, Open at Both Ends”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare