Site Navigation

(MQQFC048) Quartz Rectangular Sample Cell, 0.5 mm Path, 100 µL, Open at Both Ends

Weight80 g
SKU: MQQFC048

$197.00

In Stock

Quartz rectangular sample cell with a 0.5 mm optical path, 100 µL nominal capacity and an open-at-both-ends body. Its very slim rectangular chamber suits compact assemblies that need a short transmission path and their own end sealing or support arrangement. Sold as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC048 is a compact JGS1 quartz rectangular sample cell with a 0.5 mm optical path and 100 µL nominal capacity. Its slim open-through chamber is suited to setups that need a very short transmission path and plan the sealing, filling and support arrangement around the cell body. The narrow outer profile also helps when space in the holder or surrounding assembly is limited.

Path Length
0.5 mm
Sample Volume (Nominal)
100 µL
Opening Configuration
Open at Both Ends

Selection Specifications

Product KindSpecialized Cell
Cell TypeRectangular Sample Cell
Measurement ModeTransmission Spectroscopy
Path Length0.5 mm
Light Transmission ConfigurationTwo-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)100 µL
External Dimensions12.5 × 1.5 × 20 mm
Body Height20 mm
Base Dimensions12.5 × 1.5 mm
Internal Dimensions10 × 0.5 × 20 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodMolded 83
Opening ConfigurationOpen at Both Ends
Pack Quantity1 Piece

Choose this option

Choose this cell when you need a 0.5 mm path in a small rectangular quartz body and your system already defines how the open ends will be sealed or supported. It is especially useful when the fixture layout is tight and the cell body must fit into a narrow mounting space.

View the English selection reference.

What makes this option different

  • 0.5 mm optical path: intended for methods that require a very short transmission length.
  • Slim rectangular chamber: the internal 10 × 0.5 × 20 mm geometry defines a narrow sample space through the full body height.
  • Compact outer envelope: the 12.5 × 1.5 × 20 mm exterior helps with tight fixture layouts.
  • Open at both ends: the cell body is supplied without integrated end closure or connection hardware.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Mount the cell so the beam crosses the 0.5 mm path direction. Because the body is open at both ends, sample loading, retention and drainage depend on the separate end arrangement used in your system.

The 100 µL value is a nominal body volume, not a minimum working volume. Establish the actual working fill in the finished assembly, especially if the end treatment or mounting arrangement affects how the chamber is filled and cleared.

First-use check

  1. Inspect the optical faces and open ends for chips, residue or handling marks.
  2. Confirm beam alignment through the 0.5 mm path in the installed position.
  3. Test filling and bubble removal with a blank before routine measurements.

Fit and optical alignment

Use the 12.5 × 1.5 × 20 mm exterior as the reference for holder clearance and support. The listed internal dimensions describe the sample chamber, not the opening required in the fixture.

Z Height is not listed for this cell, so beam-height matching should be checked in the actual mount rather than inferred from the 20 mm body height. Support the body evenly and avoid clamping pressure across the optical faces.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell is listed with Molded 83 fabrication. Choose cleaning and sample-contact conditions for the complete assembly, including any seals, supports or end fittings used around the open-through body.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with suitable non-abrasive materials, and review any aggressive solvent or heated process in the context of the complete mounted setup.

Included with this option

1 rectangular sample cell. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for different path lengths, chamber dimensions, exterior sizes and opening details. Send your drawing or labelled sketch, critical dimensions, sample conditions and target quantity through the contact page if you need a modified version for your holder or method.

Additional information

Weight80 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC048) Quartz Rectangular Sample Cell, 0.5 mm Path, 100 µL, Open at Both Ends”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare