(MQQFC137) Quartz Flow Cell, 1 mm Path, 70 µL, 2 mm Internal Width
Description
MQQFC137 is a JGS1 quartz flow cell for UV/Vis measurements with a 1 mm optical path and 70 µL nominal capacity. It combines four-sided optical access optical access with a 2 mm internal width, making it a practical choice when you want a wider internal flow region than the 1 mm-width format while keeping the same compact body style and opposed tube layout.
- Path Length
- 1 mm
- Sample Volume (Nominal)
- 70 µL
- Opening Configuration
- Two Opposed Fluid Tubes
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 1 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 70 µL |
| Cell Body Dimensions | 45 × 3.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 4 mm |
| Tube Inner Diameter (ID) | 2 mm |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Opposed Fluid Tubes |
| Port Layout | Opposed end A, shown on the left of the exact original; Opposed end B, shown on the right of the exact original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose this cell when your method needs a 1 mm path but you prefer a wider internal channel and a higher nominal volume in the same general flow-cell format. The opposed tube arrangement suits straight-through connection planning, and the four-side optical access can help when illumination or observation space matters around the sample region.
What makes this option different
- 1 mm optical path with 70 µL nominal capacity.
- 2 mm internal width for a wider sample region than the narrower companion format.
- four-sided optical access configuration for optical access around the body.
- Two opposed quartz tube connections with 4 mm OD and 2 mm ID.
Using this cell
Install the cell so the beam follows the 1 mm path, then connect the two opposed tubes into the flow line. Fill carefully, remove visible bubbles from the sample region and establish a blank under the same flow conditions you will use for measurement.
The stated 70 µL is the nominal cell capacity, not a minimum working volume. During installation, support the quartz body itself rather than placing load on the projecting tubes.
First-use check
- Inspect the optical faces, body edges and tube openings before use.
- Confirm that the holder supports the body without twisting the end connections.
- Run a blank after filling and repeat after clearing any visible bubbles.
Fit and optical alignment
The optical body measures 45 × 3.5 × 12.5 mm. The fixed cell including its opposed tubes spans 81 mm. Use the body dimensions for holder support, then allow extra room beyond that fixed span for flexible tubing, its bends and access at both ends.
Z Height is not specified for this SKU, so beam-center fit to a particular holder or instrument should be checked before ordering. four-sided optical access indicates the available optical access category, but it does not by itself establish compatibility with a specific instrument geometry.
View the English selection reference.

Solvents and cleaning
Molded 83 with JGS1 quartz is commonly chosen for methods involving organic solvents or heated measurement work. Suitability still depends on the full assembly and the actual liquid conditions used in service.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaners, and clean the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 quartz flow cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different internal width, path length, body size or connection detail, send your drawing or holder information. Custom projects are reviewed and quoted separately from this listed SKU.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.