Site Navigation

(MQQFC137) Quartz Flow Cell, 1 mm Path, 70 µL, 2 mm Internal Width

Weight50 g
SKU: MQQFC137

$828.00

In Stock

JGS1 quartz flow cell with a 1 mm optical path, 70 µL nominal capacity and a 2 mm-wide internal channel. Four-sided optical access surrounds the sample region, with opposed 4 mm OD / 2 mm ID quartz tubes. The fixed cell spans 81 mm; one cell supplied.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC137 is a JGS1 quartz flow cell for UV/Vis measurements with a 1 mm optical path and 70 µL nominal capacity. It combines four-sided optical access optical access with a 2 mm internal width, making it a practical choice when you want a wider internal flow region than the 1 mm-width format while keeping the same compact body style and opposed tube layout.

Path Length
1 mm
Sample Volume (Nominal)
70 µL
Opening Configuration
Two Opposed Fluid Tubes

Selection Specifications

Product KindFlow Cell
Cell TypeFlow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length1 mm
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)70 µL
Cell Body Dimensions45 × 3.5 × 12.5 mm
MaterialQuartz
Material GradeJGS1
Port Count2
Tube Outer Diameter (OD)4 mm
Tube Inner Diameter (ID)2 mm
Fabrication MethodMolded 83
Opening ConfigurationTwo Opposed Fluid Tubes
Port LayoutOpposed end A, shown on the left of the exact original; Opposed end B, shown on the right of the exact original
Pack Quantity1 Piece
Package Contents1 × Quartz Flow Cell

Choose this option

Choose this cell when your method needs a 1 mm path but you prefer a wider internal channel and a higher nominal volume in the same general flow-cell format. The opposed tube arrangement suits straight-through connection planning, and the four-side optical access can help when illumination or observation space matters around the sample region.

What makes this option different

  • 1 mm optical path with 70 µL nominal capacity.
  • 2 mm internal width for a wider sample region than the narrower companion format.
  • four-sided optical access configuration for optical access around the body.
  • Two opposed quartz tube connections with 4 mm OD and 2 mm ID.

Using this cell

Install the cell so the beam follows the 1 mm path, then connect the two opposed tubes into the flow line. Fill carefully, remove visible bubbles from the sample region and establish a blank under the same flow conditions you will use for measurement.

The stated 70 µL is the nominal cell capacity, not a minimum working volume. During installation, support the quartz body itself rather than placing load on the projecting tubes.

First-use check

  1. Inspect the optical faces, body edges and tube openings before use.
  2. Confirm that the holder supports the body without twisting the end connections.
  3. Run a blank after filling and repeat after clearing any visible bubbles.

Fit and optical alignment

The optical body measures 45 × 3.5 × 12.5 mm. The fixed cell including its opposed tubes spans 81 mm. Use the body dimensions for holder support, then allow extra room beyond that fixed span for flexible tubing, its bends and access at both ends.

Z Height is not specified for this SKU, so beam-center fit to a particular holder or instrument should be checked before ordering. four-sided optical access indicates the available optical access category, but it does not by itself establish compatibility with a specific instrument geometry.

View the English selection reference.

English selection reference
Selection reference ↗

Solvents and cleaning

Molded 83 with JGS1 quartz is commonly chosen for methods involving organic solvents or heated measurement work. Suitability still depends on the full assembly and the actual liquid conditions used in service.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaners, and clean the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

1 quartz flow cell. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different internal width, path length, body size or connection detail, send your drawing or holder information. Custom projects are reviewed and quoted separately from this listed SKU.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC137) Quartz Flow Cell, 1 mm Path, 70 µL, 2 mm Internal Width”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare