Site Navigation

(MQQFC136) Quartz Flow Cell, 1 mm Path, 35 µL, 1 mm Internal Width

Weight50 g
SKU: MQQFC136

$828.00

In Stock

JGS1 quartz flow cell with a 1 mm optical path, 35 µL nominal capacity and a 1 mm-wide internal channel. Four-sided optical access surrounds the sample region, with opposed 4 mm OD / 2 mm ID quartz tubes. The fixed cell spans 81 mm; one cell supplied.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC136 combines a 1 mm optical path with a 35 µL nominal capacity in a compact JGS1 quartz flow cell. The narrow 1 mm internal width, four-sided optical access configuration and opposed tube layout make it useful when your flow setup needs a short path and a tightly defined sample region without giving up optical access around the cell body.

Path Length
1 mm
Sample Volume (Nominal)
35 µL
Opening Configuration
Two Opposed Fluid Tubes

Selection Specifications

Product KindFlow Cell
Cell TypeFlow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length1 mm
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)35 µL
Cell Body Dimensions45 × 3.5 × 12.5 mm
MaterialQuartz
Material GradeJGS1
Port Count2
Tube Outer Diameter (OD)4 mm
Tube Inner Diameter (ID)2 mm
Fabrication MethodMolded 83
Opening ConfigurationTwo Opposed Fluid Tubes
Port LayoutOpposed end A, shown on the left of the exact original; Opposed end B, shown on the right of the exact original
Pack Quantity1 Piece
Package Contents1 × Quartz Flow Cell

Choose this option

Choose this cell when you want a 1 mm path with a narrow internal channel and straight-through tube routing from one end of the assembly to the other. It suits installations where the body itself must stay compact, while the optical region still needs access from multiple sides for the measurement geometry around the sample channel.

What makes this option different

  • 1 mm optical path with 35 µL nominal capacity.
  • 1 mm internal width for a narrow sample region.
  • four-sided optical access configuration for optical access on four sides of the body.
  • Two opposed quartz tube connections with 4 mm OD and 2 mm ID.

Using this cell

Connect the two opposed tubes into your flow circuit and align the cell so the beam follows the 1 mm path. Fill gradually and check the optical region for trapped bubbles before taking a blank or baseline.

The 35 µL value is nominal capacity, not a minimum working-volume specification. External tubing and connectors add to the filled system volume. With this small sample region, incomplete filling or a small bubble can occupy a meaningful part of the sample region. Handle and support the cell by the body rather than by the projecting tubes.

First-use check

  1. Inspect the optical faces, body edges and tube ends before installation.
  2. Confirm that the holder supports the body without twisting the tube connections.
  3. Run a blank after filling and repeat after clearing any visible bubbles.

Fit and optical alignment

The optical body measures 45 × 3.5 × 12.5 mm. The fixed cell including its opposed tubes spans 81 mm. Use the body dimensions for holder support, then allow extra room beyond that fixed span for flexible tubing, its bends and access at both ends.

Z Height is not specified for this SKU, so it should not be treated as a drop-in match for an instrument with a fixed beam-center requirement. four-sided optical access describes the available optical access category, but the actual holder opening and beam geometry still need to match your setup.

View the English selection reference.

English selection reference
Selection reference ↗

Solvents and cleaning

Molded 83 with JGS1 quartz is often selected for methods involving organic solvents or heated measurement work. Suitability still depends on the complete assembly and the actual liquid conditions used in your system.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaners, and clean the optical faces gently with non-abrasive optical tissue.

Included with this option

1 quartz flow cell. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, internal width, tube size or body envelope, send your drawing or holder details. Custom versions are reviewed separately from this listed SKU.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC136) Quartz Flow Cell, 1 mm Path, 35 µL, 1 mm Internal Width”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare