Site Navigation

(MQQCU011) Quartz Reflectance Sample Cell, 3.5 × 40 mm Recess, 3 mm Deep

Weight50 g
SKU: MQQCU011

$359.00

In Stock

JGS1 quartz reflectance sample cell with a 3.5 × 40 mm open groove, 3 mm deep, for direct placement of solid or powder samples. The 26 × 4 × 76 mm plate body fits fixtures designed around this long, slim format. Standard 80 adhesive-bonded construction; one cell supplied.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQCU011 is a JGS1 quartz reflectance sample cell with a long rectangular open groove for direct sample placement. The 3.5 × 40 mm recessed area and 3 mm groove depth give you a defined linear sample region for reflectance measurements and solid or powder fluorescence work, while the 26 × 4 × 76 mm plate-style body helps when your fixture is built around a long, slim format. The stated nominal capacity is 420 µL; the 3 mm recess depth does not specify a transmission path.

Sample Volume (Nominal)
420 µL
Opening Configuration
Open Sample Groove

Selection Specifications

Product KindSpecialized Cell
Cell TypeReflectance Sample Cell
Measurement ModeReflectance Measurements; Solid/Powder Fluorescence
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)420 µL
External Dimensions26 × 4 × 76 mm
Cell Body Dimensions26 × 4 × 76 mm
External Dimensions ScopeBody Only
MaterialQuartz
Material GradeJGS1
Fabrication MethodStandard 80
Opening ConfigurationOpen Sample Groove
Pack Quantity1 Piece
Slot Depth3 mm
Slot Width3.5 mm
Package Contents1 × Quartz Reflectance Sample Cell

Choose this option

Choose MQQCU011 when your method needs a rectangular exposed sample area instead of a closed liquid chamber. The long, narrow groove is useful when you want to spread or pack material along a defined strip, and the larger plate body can be easier to seat in dedicated reflectance fixtures than a small upright cuvette shape.

What makes this option different

  • Rectangular open groove: a 3.5 × 40 mm recessed sample area for direct loading and inspection of the sample surface.
  • 3 mm groove depth: this describes the recess geometry for the sample area, not a transmission path length.
  • Plate-style body: the quartz body measures 26 × 4 × 76 mm for installations that use this long, slim format.
  • 420 µL nominal capacity: a stated nominal value for this SKU, separate from any minimum working fill.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Place the sample into the groove so the recess is covered or filled in a controlled, repeatable way for your method. Keep material off the surrounding rim and exterior optical faces, and use the same orientation for background and sample measurements.

For powders or packed solids, keep the sample surface even across the active region. If you are considering liquid-style use, treat this as an open recessed sample format and check whether your own method and fixture are suitable for exposed-surface handling.

First-use check

  1. Inspect the groove, faces and edges for contamination or handling damage.
  2. Test the fit in the holder and confirm that the illuminated region reaches the sample groove as intended.
  3. Run a blank or background in the same orientation you will use for measurement.

Fit and optical alignment

View the English selection reference.

The 26 × 4 × 76 mm dimensions apply to the bare body. Check your holder slot, clamp area and optical access against this plate format, especially if you are replacing a different recessed cell or another holder standard.

Z Height is not established for this SKU. If your instrument requires a defined beam-centre height or seating depth, check that point from your own holder drawing before ordering.

Solvents and cleaning

This cell uses adhesive-bonded quartz construction and corresponds to Standard 80. This construction is generally chosen for routine room-temperature aqueous samples and buffers.

Avoid organic samples and organic cleaning solvents with this cell. Keep hydrofluoric acid away from quartz, avoid hot strong alkalis and abrasive cleaning materials, and clean the groove gently so residue does not remain packed into the recess or along its edges.

Included with this option

One MQQCU011 reflectance sample cell. The listed price is for one cell. Specify any required holder or cover separately when ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different recess size, external envelope or holder fit, send a drawing or labelled sketch together with the sample type, illuminated area and any critical mounting dimensions through the contact page, and include SKU MQQCU011.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQCU011) Quartz Reflectance Sample Cell, 3.5 × 40 mm Recess, 3 mm Deep”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare