(MQQPA005) Round-Bottom Glass Particle Analysis Cell, 10 mm Path
Description
MQQPA005 is the round-bottom glass option for particle-analysis methods using a 10 mm optical path and Four-Way Light access. Its open top gives direct access for filling, while the included flat lid covers the opening between preparation steps.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 3.5 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Particle Analysis Cell |
| Measurement Mode | Particle Analysis |
| Path Length | 10 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 350 nm |
| Sample Volume (Nominal) | 3.5 mL |
| External Dimensions | 12 × 12 × 45 mm |
| Body Height | 45 mm |
| Base Dimensions | 12 × 12 mm |
| Material | Glass |
| Closure Type | Flat Lid |
| Closure Included | Yes |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Glass Particle Analysis Cell; Accompanying closure |
Choose this option
Bottom profile is a key selection point for this cell. Choose the round-bottom version when your method calls for this profile, then match the optical access and exterior dimensions to your setup. A matching path length or outer footprint alone does not make different bottom-profile options interchangeable.
What makes this option different
- Round-bottom option: select the sample-cell profile specified by your particle-analysis method, rather than choosing by external size alone.
- Four-Way Light access: optical access from multiple sides lets you arrange illumination and detection around the sample region in a suitable setup.
- Open top and included flat lid: fill directly through the opening and cover it between preparation steps; the lid is a cover, not a stated pressure seal.
- 10 mm optical path and 3.5 mL nominal capacity: identify the measurement direction and chamber size separately from the working fill needed to cover your beam.
Using this cell
Fill the cell from the open top, then place the flat lid as needed during handling or between measurement steps. Use the same cell setup for sample and blank or background work so that the optical geometry stays consistent across your method.
Before measurement, check that the optical faces and the sample region are clean and free from exterior droplets. If your procedure is sensitive to bubbles, settling or dispersion history, prepare and load each sample in the same way each time.
First-use check
- Inspect the optical faces, interior sample region and lid contact area before first use.
- Test holder fit and beam alignment with an appropriate blank or background measurement.
- After filling, check for bubbles and exterior liquid before running the method.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The body is 12 × 12 mm at the base and 45 mm high. Check holder clearance, beam position and top access in your instrument or fixture before ordering, especially if you are matching an existing holder or changing from another cell style.
Z Height is not established for this option. If your instrument has a fixed beam position or a tight holder tolerance, compare with your current cell or send your holder details before ordering.

Solvents and cleaning
This is a glass cell, but the chemical limits for this exact cell-and-closure assembly are not established here. Do not assume general acid resistance for this cuvette. Match the sample and cleaning routine to the actual liquid, concentration, temperature and contact time involved.
Avoid hydrofluoric acid, hot strong alkalis and abrasive cleaners. If your method uses aggressive chemicals or non-routine cleaning steps, check suitability for the complete wetted assembly before ordering. For general fabrication background, see Compare fabrication options.
Included with this option
1 Glass Particle Analysis Cell and an accompanying closure. The listed price is for 1 piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different path length, body size, closure arrangement or other fit detail, send your drawing or current cell reference together with the sample conditions and required quantity. Custom projects are quoted separately from the listed SKU.
Send a product-selection enquiry with SKU MQQPA005 and your holder or application details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.












Reviews
There are no reviews yet.