(MQQFL008) Quartz Micro Cuvette, 10 mm path, 2 mm Slit with Screw Closure
$599.00
JGS1 quartz micro cuvette for UV/Vis work with a 10 mm optical path, Five-Way Light access and a 2 mm slit in a screw-cap format. Its 600 µL nominal volume suits compact sample handling where a narrower sample region is required. The listed price is for 1 piece with the accompanying closure.
Description
MQQFL008 is a JGS1 quartz micro cuvette for UV/Vis measurement with a 10 mm optical path in a compact screw-cap body. The 2 mm slit, Five-Way Light layout and 600 µL nominal volume suit methods that need a tighter sample-region geometry with enclosed top access.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 600 µL
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Five-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 600 µL |
| Cell Body Dimensions | 12.5 × 12.5 × 30 mm |
| Uncapped Cell Dimensions | 12.5 × 12.5 × 41 mm |
| Overall Height without Closure | 41 mm |
| Body Height | 30 mm |
| Overall Height with Closure | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Micro Cuvette; Accompanying closure |
Choose this option
Choose MQQFL008 when your method is built around a 10 mm path, a 2 mm slit and a micro cuvette that fills from the top and closes with a screw cap. This option is useful when you need a compact sample chamber and your optical arrangement uses more than the two main transmission faces.
What makes this option different
- 10 mm optical path in a compact UV/Vis micro-cuvette body.
- 2 mm slit for methods that need a narrower sample-region geometry.
- Five-Way Light configuration for setups that use additional optical access around the cell.
- 600 µL nominal volume with screw closure in a JGS1 quartz format.
Using this cell
Fill the cell through the threaded opening and fit the accompanying closure before measurement. Keep the orientation consistent between blank and sample so the beam passes through the same region each time.
The nominal volume is 600 µL, but the minimum working volume is not established for this SKU. Before reading, make sure the sample level fully covers the beam position in your actual holder and remove visible bubbles from the sample region.
First-use check
- Inspect the optical faces, slit region and screw-cap area before use.
- Run a blank in the intended orientation to confirm holder fit and beam alignment.
- After filling, check that the beam path is fully covered and free of bubbles or exterior droplets.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The square base is 12.5 × 12.5 mm. The body height is 30 mm, the uncapped overall height is 41 mm, and the height with cap is 45 mm. Check these dimensions against holder depth and overhead clearance.
Z Height is not established for this model. If your instrument requires a defined beam-center height or a specific illuminated area, please send the holder and beam details before ordering.

Solvents and cleaning
This cuvette is made in Molded 83 quartz. This fabrication is commonly chosen for methods that may involve organic solvents, but suitability still depends on the complete sample and cleaning conditions for this exact cell and closure assembly.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials. If your method involves aggressive liquids, prolonged soaking or elevated temperature, please send the liquid, concentration, temperature and contact time for review before use.
Included with this option
1 Quartz Micro Cuvette and the accompanying closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to dimensions, optical path length, sample volume, optical windows, Z Height, closures, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application.
Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Send a product-selection enquiry with SKU MQQFL008, your holder details, sample conditions, quantity and destination.
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.













Reviews
There are no reviews yet.