Site Navigation

(MQQFC027) Quartz Rectangular Sample Cell, 4 mm Path, 640 µL, Open at Both Ends

Weight50 g
SKU: MQQFC027

$335.00

In Stock

MQQFC027 is a JGS1 quartz rectangular sample cell with a 4 mm optical path, Four-Way Light access and 640 µL nominal capacity. Its compact square body is open at both ends for fixtures that need multi-side optical access and their own sealing arrangement. Sold as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC027 is a compact JGS1 quartz rectangular sample cell with a 4 mm optical path and Four-Way Light configuration. Its square internal chamber, 640 µL nominal capacity and open-at-both-ends body make it useful when you need optical access from more than one side in a small cell that will be integrated into a separate holder. This option is supplied as the cell body, not as a finished sealed assembly.

Path Length
4 mm
Sample Volume (Nominal)
640 µL
Opening Configuration
Open at Both Ends

Selection Specifications

Product KindSpecialized Cell
Cell TypeRectangular Sample Cell
Measurement ModeTransmission Spectroscopy
Path Length4 mm
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)640 µL
External Dimensions6.5 × 6.5 × 40 mm
Body Height40 mm
Base Dimensions6.5 × 6.5 mm
Internal Dimensions4 × 4 × 40 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodMolded 83
Opening ConfigurationOpen at Both Ends
Pack Quantity1 Piece

Choose this option

Choose MQQFC027 when your method needs a 4 mm transmission path and side optical access around a compact square chamber. This format is useful for fixtures that must leave more than one face available for optical work while handling support, sealing and beam positioning outside the cell itself.

View the English selection reference.

What makes this option different

  • Four-Way Light layout: gives optical access from multiple sides for suitable measurement geometry.
  • 4 mm optical path: intended for methods that require this defined path length.
  • Square 4 × 4 × 40 mm chamber: combines a compact footprint with a full 40 mm internal length.
  • Open at both ends: designed for custom mounting or sealing rather than a ready-connected cell.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Mount the cell so the main beam crosses the 4 mm chamber width used by your method. If your setup uses more than one optical direction, keep the cell orientation fixed between blank and sample measurements so the same faces remain in use.

Because the body is open at both ends, sample retention, sealing and bubble control depend on the fixture built around it. Treat the stated 640 µL as nominal chamber capacity rather than a minimum working fill.

First-use check

  1. Inspect all transmitting faces and the end openings before installation.
  2. Confirm that the holder supports the body evenly without blocking the required optical faces.
  3. Run a blank and verify alignment, sample retention and bubble clearance in the final setup.

Fit and optical alignment

Use the 6.5 × 6.5 × 40 mm outside dimensions to check holder clearance and side access. The 4 × 4 × 40 mm inner dimensions describe the sample chamber and should not be used as the fixture opening size.

Z Height is not listed, so instrument matching should not be assumed from the outer geometry alone. If beam position or side access is critical, provide the holder drawing, beam footprint and required optical direction for review.

English selection reference
Selection reference ↗

Solvents and cleaning

Molded 83 is an MQ fabrication option often chosen for methods involving organic solvents or elevated-temperature use. Suitability should be considered for the complete assembly, including any sealing or support materials used with this open-ended body. For aggressive chemicals, heated operation or long soak times, send the liquid, concentration, temperature and contact time for review.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean optical faces gently with non-abrasive optical tissue.

Included with this option

1 rectangular sample cell, SKU MQQFC027. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz projects for changes to path length, chamber format, outside dimensions, optical access, Z Height, interfaces, fabrication and tolerances. Send a drawing or labelled sketch with the critical dimensions, fixture details and sample conditions.

Send a product-selection enquiry with SKU MQQFC027 if you need a different optical layout, a defined interface or a complete assembled version.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC027) Quartz Rectangular Sample Cell, 4 mm Path, 640 µL, Open at Both Ends”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare