(MQQFC027) Quartz Rectangular Sample Cell, 4 mm Path, 640 µL, Open at Both Ends
Description
MQQFC027 is a compact JGS1 quartz rectangular sample cell with a 4 mm optical path and Four-Way Light configuration. Its square internal chamber, 640 µL nominal capacity and open-at-both-ends body make it useful when you need optical access from more than one side in a small cell that will be integrated into a separate holder. This option is supplied as the cell body, not as a finished sealed assembly.
- Path Length
- 4 mm
- Sample Volume (Nominal)
- 640 µL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 4 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 640 µL |
| External Dimensions | 6.5 × 6.5 × 40 mm |
| Body Height | 40 mm |
| Base Dimensions | 6.5 × 6.5 mm |
| Internal Dimensions | 4 × 4 × 40 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC027 when your method needs a 4 mm transmission path and side optical access around a compact square chamber. This format is useful for fixtures that must leave more than one face available for optical work while handling support, sealing and beam positioning outside the cell itself.
What makes this option different
- Four-Way Light layout: gives optical access from multiple sides for suitable measurement geometry.
- 4 mm optical path: intended for methods that require this defined path length.
- Square 4 × 4 × 40 mm chamber: combines a compact footprint with a full 40 mm internal length.
- Open at both ends: designed for custom mounting or sealing rather than a ready-connected cell.
Structure and dimensions

Using this cell
Mount the cell so the main beam crosses the 4 mm chamber width used by your method. If your setup uses more than one optical direction, keep the cell orientation fixed between blank and sample measurements so the same faces remain in use.
Because the body is open at both ends, sample retention, sealing and bubble control depend on the fixture built around it. Treat the stated 640 µL as nominal chamber capacity rather than a minimum working fill.
First-use check
- Inspect all transmitting faces and the end openings before installation.
- Confirm that the holder supports the body evenly without blocking the required optical faces.
- Run a blank and verify alignment, sample retention and bubble clearance in the final setup.
Fit and optical alignment
Use the 6.5 × 6.5 × 40 mm outside dimensions to check holder clearance and side access. The 4 × 4 × 40 mm inner dimensions describe the sample chamber and should not be used as the fixture opening size.
Z Height is not listed, so instrument matching should not be assumed from the outer geometry alone. If beam position or side access is critical, provide the holder drawing, beam footprint and required optical direction for review.

Solvents and cleaning
Molded 83 is an MQ fabrication option often chosen for methods involving organic solvents or elevated-temperature use. Suitability should be considered for the complete assembly, including any sealing or support materials used with this open-ended body. For aggressive chemicals, heated operation or long soak times, send the liquid, concentration, temperature and contact time for review.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean optical faces gently with non-abrasive optical tissue.
Included with this option
1 rectangular sample cell, SKU MQQFC027. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz projects for changes to path length, chamber format, outside dimensions, optical access, Z Height, interfaces, fabrication and tolerances. Send a drawing or labelled sketch with the critical dimensions, fixture details and sample conditions.
Send a product-selection enquiry with SKU MQQFC027 if you need a different optical layout, a defined interface or a complete assembled version.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.