(MQQFL013) Quartz Flow Cell, 3 mm path, 72 µL nominal capacity, Threaded Connections, 15 mm Z Height
$432.00
JGS1 quartz flow cell MQQFL013 combines a 3 mm optical path with a Three-Way Light layout and two top fluid connections, keeping tubing access above the optical body in compact fluorescence assemblies. Its 72 µL nominal capacity and 15 mm Z Height help you match the sample region and beam position to your holder layout. Sold as 1 piece.
Description
MQQFL013 is a JGS1 quartz flow cell for fluorescence spectroscopy with a 3 mm optical path, 72 µL nominal capacity and a Three-Way Light layout. Its two top fluid connections keep the tubing approach above the cell body, which helps when side optical access needs to stay clear in a compact fixture.
The optical region is set at a 15 mm Z Height from the cell base, with a 4 × 6 mm window area for beam placement. This gives you a defined reference for holder design and alignment without relying on overall body height alone.
- Path Length
- 3 mm
- Sample Volume (Nominal)
- 72 µL
- Opening Configuration
- Two Top Fluid Connections
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | Fluorescence Spectroscopy |
| Path Length | 3 mm |
| Light Transmission Configuration | Three-Way Light |
| Z Height | 15 mm |
| Optical Window Dimensions | 4 × 6 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 72 µL |
| External Dimensions | 12.5 × 12.5 × 35 mm |
| Body Height | 35 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Two Top Fluid Connections |
| Port Layout | Top connection at the left in the referenced original; Top connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFL013 when your setup needs a small fluorescence flow cell with top-entry fluid routing and a defined beam-centre height. It suits assemblies where tubing should approach from above while the side optical path remains accessible for the intended excitation and collection geometry.
What makes this option different
- Two top fluid connections keep both fluid access points above the cell, which helps preserve side clearance around the optical faces and simplifies tubing approach in tight holders.
- Three-Way Light layout supports straight-through optical use plus side optical access in this exact flow-cell geometry, which is useful for fluorescence arrangements that do not rely on a simple two-face layout.
- 15 mm Z Height gives a fixed beam-centre position from the cell base, so holder matching should be based on beam height as well as body size.
- 72 µL nominal capacity keeps the sample region compact while remaining a flow-through cell; nominal capacity should not be treated as the minimum working fill.
- 4 × 6 mm window size provides a practical reference for beam placement within the optical area during setup.
- Adhesive-bonded quartz construction is a suitable choice for routine room-temperature aqueous samples and buffer-based methods rather than organic-solvent service.
Using this cell
Mount the cell with the intended optical faces aligned to your excitation and collection directions. Fill and flush the flow path slowly so the optical region is fully wetted before measurement, and clear any trapped bubbles before running a blank or sample.
Because both fluid connections are on the top, plan the tubing route with enough space above the cell for approach, bending radius and service access. Handle the part by the quartz body, not by the connections.
First-use check
- Inspect the optical faces and connection area for chips, residue or visible contamination.
- Place the cell in the holder and verify that the beam passes through the intended window area at the 15 mm centre height.
- Prime the flow path and confirm stable, bubble-free filling before measurement.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The stated 12.5 × 12.5 × 35 mm dimensions apply to the bare optical body. The total installed envelope will be larger once tubing and any connected fittings are in place, so leave extra vertical clearance above the cell.
Z Height is 15 mm from the base to the beam centre. Match that height directly to your holder or instrument geometry. The nominal volume is 72 µL, but a minimum working volume is not stated here and should not be assumed from the nominal figure.

Solvents and cleaning
This cell uses Standard 80 adhesive-bonded quartz construction. It is generally suited to room-temperature aqueous samples and buffer-based methods.
Avoid organic samples and organic cleaning solvents with this construction. If your method involves aggressive chemicals, elevated temperature or long contact times, ask us to review the full wetted setup before ordering.
Keep hydrofluoric acid away from quartz, avoid hot strong alkalis and clean the optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Flow Cell. The listed price is for one cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also coordinate custom JGS1 quartz flow cells for changes to dimensions, optical path length, sample volume, window layout, Z Height or connection arrangement. Send a drawing or labelled sketch together with holder details, sample conditions, required quantity and target timing.
Send a product-selection enquiry with SKU MQQFL013 if you need a different geometry or want us to review fit before ordering.
Additional information
| Weight | 250 g |
|---|
You must be logged in to post a review.














Reviews
There are no reviews yet.