(MQQFC011) Quartz Rectangular Sample Cell, 2.5 mm Path, 2 mL, Open at Both Ends
Description
MQQFC011 is a JGS1 quartz rectangular sample cell for UV/Vis measurements from 200 to 2500 nm. It combines a 2.5 mm optical path with a 2 mL nominal capacity in a tall open-at-both-ends body, making it useful when you need this path length together with extra chamber height in a narrower rectangular format.
The Two-Way Light layout provides a simple transmission geometry, while the 50 mm body height gives more vertical chamber length than shorter bodies in the same general type. This is a cell body for a separate holder or end fixture, not a finished ported assembly.
- Path Length
- 2.5 mm
- Sample Volume (Nominal)
- 2 mL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 2.5 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 2 mL |
| External Dimensions | 25 × 10.5 × 50 mm |
| Body Height | 50 mm |
| Base Dimensions | 25 × 10.5 mm |
| Internal Dimensions | 17 × 2.5 × 50 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC011 when your setup needs a 2.5 mm rectangular transmission path and a tall sample chamber, but you still want a narrower base footprint than some larger-volume bodies. It suits custom-mounted assemblies where you control the end support, sample retention and surrounding hardware outside the cell itself.
View the English selection reference. Also available in the product gallery. Group photographs illustrate other options in the series.
What makes this option different
- 2.5 mm optical path: suited to methods built around this defined transmission distance.
- 2 mL nominal capacity: moderate chamber volume within a tall, narrow body format.
- 25 × 10.5 × 50 mm exterior: tall profile with a narrower footprint for holder planning.
- Open at both ends: meant for separate end support or sealing, not as a finished connected assembly.
Structure and dimensions

Using this cell
Orient the cell so the beam passes through the 2.5 mm path. The internal chamber dimensions are 17 × 2.5 × 50 mm, which describe the sample space and help when planning fill direction and how the sample will occupy the chamber.
For liquid measurements, establish your fill, sealing and bubble-removal steps in the final assembly before routine use. The nominal 2 mL value describes the cell chamber only; the total liquid held by the complete setup can differ once external seals or interfaces are added.
First-use check
- Inspect the optical faces, chamber edges and end openings before installation.
- Check the cell in the holder with a blank in the intended measurement orientation.
- Confirm that bubbles, seals or fixture parts do not intrude into the optical path.
Fit and optical alignment
Use the 25 × 10.5 × 50 mm external dimensions to check the holder opening and support geometry. Support the body evenly and avoid point loading at the edges or direct clamping across the optical faces.
Z Height is not specified for this SKU, so beam-center alignment should be checked in the actual fixture. If your instrument has a fixed beam height, send the holder drawing and required optical position before ordering.

Solvents and cleaning
This SKU is listed as Standard 80, an adhesive-bonded quartz construction typically used for routine room-temperature aqueous samples and buffers. Avoid organic samples and organic cleaning solvents on the bonded assembly. If your method requires organic solvents or heated treatment, ask about a more suitable sintered or molded option before ordering.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the optical faces gently with non-abrasive lab wipes.
Included with this option
1 rectangular sample cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for projects that need a different path length, chamber format, external dimensions, opening arrangement or fabrication option. If beam height, holder fit or end sealing is important in your setup, send a labelled sketch or dimensioned drawing with the critical dimensions and tolerances.
Send a product-selection enquiry with SKU MQQFC011, your holder or interface details, sample conditions, quantity and delivery destination.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.














Reviews
There are no reviews yet.