(MQQFC117) JGS1 Quartz Flow Cell, 0.6 mm Path, 170 µL, Bent Tubes
Description
MQQFC117 is a JGS1 quartz flow cell with 0.6 mm optical path and 170 µL nominal capacity. The bent end tubes lead away from the flat central measuring section. Its 50 × 6.5 × 1.4 mm body and 5 mm OD / 3 mm ID tubes should be checked separately when planning the measurement region and fluid connections.
- Path Length
- 0.6 mm
- Sample Volume (Nominal)
- 170 µL
- Opening Configuration
- Two Bent End Tubes
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 0.6 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 170 µL |
| Cell Body Dimensions | 50 × 6.5 × 1.4 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 5 mm |
| Tube Inner Diameter (ID) | 3 mm |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Bent End Tubes |
| Port Layout | Bent tube at the left end of the flattened optical section as drawn; Bent tube at the right end of the flattened optical section as drawn |
| Wall Thickness | 0.4 mm |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose this cell for a method requiring a 0.6 mm path in a slim, flattened optical section. The bent tubes provide connection approaches away from the middle of that section; check their orientation against your holder and tubing route.
What makes this option different
- 0.6 mm specified optical path.
- 170 µL nominal capacity.
- The bent end tubes lead away from the flat central measuring section.
- 5 mm OD / 3 mm ID tube connection dimensions.
Structure and dimensions

Using this cell
Align the 0.6 mm transmission path with your instrument beam and keep the installed position consistent for blank and sample measurements.
Support the body during installation and relieve strain from the connected tubing. Fill and flush carefully, checking that the illuminated region is covered and free of bubbles. The 170 µL value is nominal capacity, not a minimum working-volume specification; external tubing and connectors hold additional liquid.
First-use check
- Inspect the optical region, body and tube ends.
- Test holder support and connection clearance before introducing liquid.
- Run a method blank after bubble removal in the final installed position.
Fit and optical alignment
The flat optical section measures 50 × 6.5 × 1.4 mm. The drawing separately gives a 93 mm projected span and a 35 mm tube-leg dimension. The 1.4 mm thickness applies to the flat section; the connecting tubes are 5 mm OD. Plan the complete mounting and tube clearance from these separate dimensions.
A Z Height is not specified for this option. Compare your beam position and footprint with the mounted optical region. Send any pressurized-system requirements for assessment of the complete cell, connections and operating conditions before use.
Solvents and cleaning
Molded 83 is the MQ fabrication option for this cell, generally selected for organic-solvent methods or temperature-controlled work. Review the complete wetted assembly, including tubing and any connectors, for your liquid, concentration, temperature and contact time.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean exterior optical faces gently with suitable non-abrasive optical tissue.
Included with this option
One MQQFC117 quartz flow cell. The listed price is for one cell. Photographs showing more than one cell or a mounting arrangement illustrate the product; the sales unit remains one flow cell.
Availability and ordering
Contact us to check current availability and dispatch timing when a delivery date matters to your work. Preparation or production, carrier transit and customs clearance are separate considerations.
Discuss a custom version
We can review changes to optical path, chamber geometry, tube position or connection dimensions. Send your requirements with SKU MQQFC117, a drawing or holder details, liquid conditions and quantity.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.









Reviews
There are no reviews yet.