Site Navigation

(MQQFC097) Quartz Flow Cell with Detachable PTFE Fittings, 10 mm Path, 3.5 mL

Weight50 g
SKU: MQQFC097

$336.00

In Stock

JGS1 quartz flow cell with a 10 mm optical path, 3.5 mL nominal capacity and two opposed detachable PTFE fittings. Four optical side faces surround the chamber; the fittings have 5 mm OD / 2 mm ID tube stubs. Allow for the 79 mm assembled span as well as connected tubing; one cell supplied.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC097 is a JGS1 quartz flow cell for UV/Vis measurements with a 10 mm optical path and 3.5 mL nominal capacity. Its four-sided optical access layout, 10 × 10 × 37 mm internal channel and detachable PTFE end fittings make it a practical option when you need a larger flow volume together with optical access around the sample region. This version is supplied as one piece.

Path Length
10 mm
Sample Volume (Nominal)
3.5 mL
Opening Configuration
Two Opposed Detachable Fluid Fittings

Selection Specifications

Product KindFlow Cell
Cell TypeFlow Cell
Measurement ModeUV/Vis Spectroscopy
Path Length10 mm
Light Transmission ConfigurationFour-Way Light
Sample Volume (Nominal)3.5 mL
External Dimensions79 × 12.5 × 12.5 mm
Cell Body Dimensions45 × 12.5 × 12.5 mm
External Dimensions ScopeInstalled Assembly
Body Height45 mm
Base Dimensions12.5 × 12.5 mm
Internal Dimensions10 × 10 × 37 mm
MaterialQuartz
Material GradeJGS1
Port Count2
Tube Outer Diameter (OD)5 mm
Tube Inner Diameter (ID)2 mm
Opening ConfigurationTwo Opposed Detachable Fluid Fittings
Fitting MaterialPTFE
Detachable FittingsYes
Port LayoutOpposed end A, shown on the left of the exact original; Opposed end B, shown on the right of the exact original
Pack Quantity1 Piece
Package Contents1 × Quartz Flow Cell

Choose this option

Choose MQQFC097 when your setup needs a 10 mm transmission path, a relatively large internal channel and opposed end connections rather than top-entry ports. The four-sided optical access geometry is useful where side optical access around the sample region matters, while the detachable PTFE fittings help you plan tubing connection separately from the quartz body.

What makes this option different

  • 10 mm optical path for UV/Vis methods built around this standard transmission length.
  • four-sided optical access configuration with side optical access around the sample region.
  • 10 × 10 × 37 mm internal channel and 3.5 mL nominal capacity for larger flowing sample volumes than narrow micro-flow formats.
  • Two opposed detachable PTFE fittings with tube stubs measuring 5 mm OD and 2 mm ID.

Using this cell

The 5 mm outer diameter and 2 mm inner diameter describe the PTFE tube stubs on the cell. Select mating tubing by its fit over those stubs and by the tubing manufacturer’s recommendations; these numbers are not a specified size for a separate hose. The detachable parts are the fluid fittings, not a split optical sample chamber.

Install the cell so the optical faces remain accessible and the tubing can approach both ends without twisting the fittings. Fill or flush the channel gradually and inspect the illuminated sample region before measurement, because bubbles or residue in this area will affect the transmission path.

The detachable fittings are part of the fluid connection layout, but they do not by themselves define pressure capability. Support the quartz body during installation and avoid using connected tubing as a handle or lever.

The stated 3.5 mL value is the nominal capacity of the cell. It should not be treated as a minimum working volume, and any tubing or other connected parts add extra system volume outside the cell itself.

First-use check

  1. Inspect the optical faces, internal channel and fittings for chips, residue or visible contamination.
  2. Check holder clearance against the assembled length and confirm that tubing can approach both ends without strain.
  3. Run a suitable blank through the fully filled cell and confirm that the optical region is free of bubbles before measurement.

Fit and optical alignment

View the English selection reference.

The assembled external size is 79 × 12.5 × 12.5 mm, while the quartz body height is 45 mm and the base section is 12.5 × 12.5 mm. Use the assembled length for holder and enclosure clearance, and leave additional room at both ends for tubing approach and bend radius.

Z Height is not listed for this SKU, so beam height should be checked against your holder or instrument before purchase where vertical beam position is critical. four-sided optical access supports side optical access, but it does not by itself define a particular instrument fit.

English selection reference
Selection reference ↗

Solvents and cleaning

This option combines a quartz optical body with detachable PTFE fittings. Choose the sample and cleaning liquid for the complete wetted assembly, including its sealing components. For aggressive chemicals, elevated temperature or long contact time, have the intended conditions checked before use; the fittings alone do not establish an operating limit.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean the exterior optical faces gently with non-abrasive optical tissue or another suitable lint-free wipe.

Included with this option

1 Quartz Flow Cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz flow-cell projects for changes to path length, channel size, external envelope, optical access and connection details. If you need a different fit, send your drawing or holder information, the critical dimensions, sample conditions and target quantity so the project can be reviewed and quoted. Send a product-selection enquiry with SKU MQQFC097 and your application details.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC097) Quartz Flow Cell with Detachable PTFE Fittings, 10 mm Path, 3.5 mL”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare