(MQQFL035) JGS1 Quartz Flow Cell, 5 / 8 mm Paths, 1.5 mL, Opposed Quartz Tubes
Description
MQQFL035 is a JGS1 quartz flow cell with dual 5 mm and 8 mm optical paths, four-sided optical access and a 1.5 mL nominal capacity. The long narrow chamber and opposed end tubes make it useful when you need a slim flow cell body with straight-through fluid routing and two defined optical directions in the same cell.
- Path Length
- 5 mm / 8 mm (dual path)
- Sample Volume (Nominal)
- 1.5 mL
- Opening Configuration
- Two Opposed Fluid Tubes
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 5 mm / 8 mm (dual path) |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.5 mL |
| External Dimensions | 70 × 10 × 10 mm |
| Cell Body Dimensions | 50 × 10 × 10 mm |
| Uncapped Cell Dimensions | 70 × 10 × 10 mm |
| External Dimensions Scope | Uncapped Cell |
| Internal Dimensions | 8 × 5 × 43 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 5 mm |
| Tube Inner Diameter (ID) | 3 mm |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Opposed Fluid Tubes |
| Fitting Material | Quartz |
| Port Layout | Opposed end A, shown on the left of the exact original; Opposed end B, shown on the right of the exact original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose this cell when your method needs the specific 5/8 mm dual-path arrangement instead of a single fixed path. The internal chamber is specified as 8 × 5 × 43 mm, with nominal capacity stated separately as 1.5 mL. The opposed end tubes follow the cell length; the 43 mm chamber dimension is separate from the two optical path lengths.
What makes this option different
- Dual optical paths: 5 mm and 8 mm path directions are available in the same flow cell body.
- Four-sided optical access: optical access from four sides around the chamber.
- Long narrow internal chamber: 8 × 5 × 43 mm with 1.5 mL nominal capacity.
- Opposed end tubes: quartz tube connections with 5 mm OD and 3 mm ID for straight-through routing.
- Slim outer form: 70 × 10 × 10 mm fixed-parts envelope with a 50 × 10 × 10 mm body section.
Structure and dimensions

Using this cell
Install the cell so the end tubes line up with the intended flow direction, and support the body rather than the projecting tubes during connection. Fill and flush the chamber slowly so bubbles do not remain in the optical region.
When changing between methods, keep the measurement direction consistent with the optical path you intend to use. The 1.5 mL figure is the nominal cell capacity, not a stated minimum working fill, and no pressure limit is listed for this SKU.
First-use check
- Inspect the optical faces, chamber and both end tubes for chips, contamination or transport damage.
- Check holder clearance for the 70 mm overall fixed cell-and-tube span and for the tubing run at both ends.
- Rinse with a suitable liquid, fill slowly and confirm that the illuminated chamber area is free of bubbles and exterior droplets.
Fit and optical alignment
View the English selection reference.
The fixed-parts envelope is 70 × 10 × 10 mm, and the optical body section is 50 × 10 × 10 mm. Leave additional space beyond the cell itself for external tubing and bend radius at both ends.
Z Height is not listed for this cell. If your holder or instrument depends on a specific beam-center height, check that point before ordering.
Solvents and cleaning
Molded 83 is commonly chosen for methods involving organic solvents and for applications that may involve temperature control. Choose the liquid handling and cleaning routine for the complete assembly, including the connected fluid path, and review suitability for aggressive liquids, elevated temperature or long contact time before use.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials. Wipe the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 quartz flow cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical access, connection layout, fabrication and tolerances. Send your drawing or holder details, path requirement, sample conditions and quantity through the contact page, and mention SKU MQQFL035.
Design notes for this configuration: 5 / 8 mm Quartz Flow Cell: Planning Two Optical Directions (MQQFL035)
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.