(C103CS) Quartz Triangular Cell, 8 mL

Weight	100 g

SKU: C103CS

Original price was: $237.00.Current price is: $214.00.

In Stock

C103CS is a JGS1 quartz triangular cell with Three-Way Light access, an open top and 8 mL nominal capacity. Its triangular body gives optical access from three sides for UV/Vis and fluorescence work across 200–2500 nm, while the open top keeps filling and sample inspection straightforward. Sold per 1 cuvette.

In Stock

SKU: C103CS Categories: Cuvettes, Products, Quartz Triangular Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C103CS is a JGS1 quartz triangular cell for UV/Vis and fluorescence setups that use three-side optical access. Its open-top body, 8 mL nominal capacity and triangular cross-section make it useful when you need direct sample loading and a defined three-face measurement geometry instead of a square-body cell.

The body height is 30 mm, and the triangular section is defined by outer side lengths of 30 mm, 30 mm and 42 mm. Those dimensions matter when you are planning holder clearance, beam approach and detector position around the cell body, while the optical path length itself is not specified for this SKU.

Sample Volume (Nominal): 8 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Triangular Cell
Measurement Mode	Fluorescence Spectroscopy; UV/Vis Spectroscopy
Light Transmission Configuration	Three-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	8 mL
Body Height	30 mm
Material	Quartz
Material Grade	JGS1
Fabrication Method	Standard 80
Opening Configuration	Open Top

Choose this option

Choose C103CS when your method benefits from direct top access and a triangular body with optical access on three sides. The 8 mL nominal capacity suits methods that work with a larger filled sample body than micro-format cells, and the JGS1 quartz material supports work from 200 to 2500 nm. This format is also practical when you want to see, fill and empty the sample chamber by hand between runs.

What makes this option different

Open-top access: sample is added directly from above, which simplifies filling, inspection and emptying.
Three-Way Light configuration: the cell body provides optical access from three sides for methods built around that beam geometry.
Triangular outer section: the body uses 30 mm, 30 mm and 42 mm outer side lengths rather than a rectangular footprint.
8 mL nominal capacity: useful when your routine needs a fuller sample chamber, but this is not a minimum working volume.
Adhesive-bonded quartz construction: this construction style is best selected with sample and cleaning liquids in mind.

Using this cell

Fill from the top and keep the cell orientation consistent throughout blank and sample measurements. With triangular cells, rotation changes the relationship between the optical faces and the instrument beam, so a repeatable facing direction matters.

Because this is an open-top design, handling conditions around movement, splashing and evaporation should be considered in your method. If your setup needs a covered or sealed arrangement, check that before ordering rather than assuming an added closure is included.

First-use check

Inspect the cell for shipping damage and check that the optical faces are clean.
Place the cell in the holder and confirm that the triangular body seats without interference.
Run a blank or background reading in the intended orientation before measuring samples.

Fit and optical alignment

Use the triangular outer geometry and 30 mm body height to check holder clearance and surrounding space in the sample compartment. The listed 30/30/42 mm values describe the outer triangular section, not rectangular width and depth values and not the optical path.

Z Height is not stated for this SKU, so do not assume a beam-center position from body height alone. If your instrument or holder depends on a defined beam height or a known path length, those points should be checked before purchase.

Solvents and cleaning

Avoid organic samples and organic cleaning solvents with this adhesive-bonded cell.

This cell uses adhesive-bonded quartz construction, described in MQ terminology as Standard 80. For this construction style, room-temperature water-based samples and buffers are the safer starting point. If your method uses organic solvents, discuss the exact liquid and cleaning routine before ordering rather than assuming the full assembly is suitable.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Rinse promptly after use and wipe exterior optical faces gently with non-abrasive optical tissue.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch, together with holder information, application wavelength range, sample chemistry and any required delivery date. Discuss your requirements and reference C103CS.