(C012TS3) Quartz Flow Cell, 1 mm Path, 350 µL

Weight	30 g

SKU: C012TS3

Original price was: $327.00.Current price is: $295.00.

In Stock

C012TS3 is a JGS1 quartz flow cell with a 1 mm optical path, 350 µL nominal capacity and Two-Way Light transmission. Two opposed M6 threaded fluid openings support straight end-to-end connection planning. Supplied as 1 cell per pack.

In Stock

SKU: C012TS3 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C012TS3 is a quartz flow cell for UV/Vis work that combines a short 1 mm optical path with a 350 µL nominal capacity in a compact threaded format. Its Two-Way Light layout and opposed M6 end openings make it a practical choice when you want a defined transmission path and a straightforward two-port flow connection in the same cell.

JGS1 quartz supports the stated 200–2500 nm application range. This option is sold as 1 cell per pack.

Path Length: 1 mm
Sample Volume (Nominal): 350 µL
Opening Configuration: Two Opposed Threaded Fluid Openings

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	1 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Port Count	2
Port Thread	M6
Fabrication Method	Molded 83
Opening Configuration	Two Opposed Threaded Fluid Openings

Choose this option

Choose C012TS3 when your method needs a 1 mm flow-through optical path and a modest internal cell volume rather than a larger circulation space. The two opposed M6 openings suit installations where tubing or connection hardware approaches from each end, helping you plan the optical section and liquid path together.

What makes this option different

1 mm optical path for methods written around a short transmission distance.
350 µL nominal capacity for planning the cell volume within your flow setup.
Two-Way Light layout for transmission through two opposed optical faces.
Two opposed M6 threaded openings for end-to-end connection planning.

Using this cell

Connect the cell through the two threaded end openings and fill gradually so liquid reaches the optical region without trapping bubbles. In routine use, it helps to wet the full connected path before setting your blank, especially if your method is sensitive to residual air or carryover from upstream tubing.

The 350 µL figure is the nominal cell volume only. If your process depends on total priming or rinse volume, include the connected tubing and fittings in your own system calculation.

No pressure rating is stated for this listing, so pressurized use should be reviewed against your own connection hardware and operating conditions.

First-use check

Inspect the quartz body and optical faces for chips, residue or handling marks.
Verify that your fittings match the M6 thread specification.
Fill slowly with a suitable blank or process liquid and check for leaks and trapped bubbles.
Confirm that the beam passes through the intended optical section in your setup.

Fit and optical alignment

The key fit points provided here are the 1 mm path and the two opposed M6 connection format. External body dimensions and Z Height are not established for this SKU, so holder clearance and beam position should be checked in your instrument or fixture before ordering if space or alignment is critical.

Two-Way Light describes the transmission geometry of the cell itself. It should not be treated as a guarantee of fit to a particular holder or spectrometer compartment.

Solvents and cleaning

Molded 83 quartz is commonly chosen for methods that may involve organic solvents and temperature-controlled work. Chemical suitability still depends on the complete wetted assembly, including any fittings, seals and the actual concentration, temperature and contact time in use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and choose a cleaning routine that is suitable for both the cell and the connected flow-path components.

Included with this option

The listed price is for one C012TS3 flow cell.

Additional accessory contents should be confirmed for your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. If fit or connection details are critical, send a labelled sketch or drawing with the dimensions and operating conditions that matter to your application.