(C104CE8) Quartz Micro Cuvette, 10 mm / 2 mm (dual path) Path, 700 µL

Weight	30 g

SKU: C104CE8

Original price was: $452.00.Current price is: $407.00.

In Stock

JGS1 quartz micro cuvette for fluorescence work with a 10 mm primary path, 2 mm secondary path and Four-Way Light access around the sample region. This option combines a 700 µL nominal capacity with a compact 12.5 × 12.5 × 45 mm uncapped body and a supplied lid. Sold as 1 cuvette per price unit.

In Stock

SKU: C104CE8 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CE8 is a JGS1 quartz micro cuvette for fluorescence measurements that use a 10 mm / 2 mm dual-path layout. Its Four-Way Light configuration gives optical access from four sides around the sample region, while the 700 µL nominal capacity and compact 12.5 × 12.5 × 45 mm uncapped body help when you need a small-format cell rather than a full-volume square cuvette. A lid is included, and this MQ listing is sold as 1 cuvette per price unit.

Path Length: 10 mm / 2 mm (dual path)
Sample Volume (Nominal): 700 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm / 2 mm (dual path)
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	2 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	2 mm

Choose this option

Choose this cell when your method is built around the stated 10 mm primary path and 2 mm secondary path, and you want four-side optical access in a compact fluorescence cuvette. The 700 µL nominal capacity suits small-volume handling, while the square body format helps with holder planning where space around the sample position matters.

What makes this option different

10 mm primary path with a 2 mm secondary path for methods that use this dual-path geometry.
Four-Way Light layout for optical access from four vertical sides around the sample region.
700 µL nominal capacity in a compact micro-cuvette format.
12.5 × 12.5 × 45 mm uncapped body, with lid height to be considered separately in your setup.

Using this cell

Fill from the top so the illuminated sample region is fully covered during measurement, and remove visible bubbles before placing the cell in the holder. Keep the same orientation for blank and sample runs if your procedure depends on the stated path direction.

The 700 µL figure is the nominal capacity of the cell. It is not a stated minimum working volume, so lower fills should only be used when the liquid level still covers the beam position in your instrument.

First-use check

Inspect the optical faces and top opening for dust, marks or residue.
Rinse with a sample-compatible liquid before first measurement.
Place the cell in the holder and confirm stable seating and top clearance.
Run a blank and verify that the filled sample covers the beam area used by your method.

Fit and optical alignment

The body dimensions given here are for the uncapped cell: 12.5 × 12.5 × 45 mm. This helps with holder clearance and seating checks, especially in compact fluorescence assemblies, but you should allow extra vertical space for the included lid.

Z Height is not specified for this SKU. If your instrument has a fixed beam center or limited vertical adjustment, check beam position against the actual illuminated region rather than assuming compatibility from the Four-Way Light format alone.

Solvents and cleaning

This cuvette is described with Molded 83 fabrication. This style is commonly selected for organic-solvent methods and temperature-involved applications, but suitability still depends on the complete assembled cell and lid under your actual conditions.

Chemical limits for this exact SKU are not listed here. Check sample chemistry, concentration, temperature, contact time and cleaning liquid for the full assembly before routine use. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 1 cuvette with a lid included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch and include holder or instrument information, application wavelength and sample conditions. Discuss your requirements and quote part number C104CE8.