(C404CR2) Quartz High-Capacity Cuvette, 40 mm Path, 64 mL
Original price was: $255.00.$230.00Current price is: $230.00.
C404CR2 is a JGS1 quartz high-capacity cuvette with a 40 mm optical path, Four-Way Light access and a 64 mL nominal capacity for fluorescence spectroscopy. Its 40 × 40 × 40 mm open-top chamber gives direct top loading, and a lid is included for covered handling after filling. Sold per 1 cuvette with lid.
Description
C404CR2 is a JGS1 quartz high-capacity cuvette built around a 40 mm optical path and a large square sample chamber for fluorescence spectroscopy. The open-top format gives direct access for filling and inspection, while the Four-Way Light layout provides optical access on four sides around the sample region. This option is supplied with a lid, which is useful when you want the large chamber format with a matching cover included.
- Path Length
- 40 mm
- Sample Volume (Nominal)
- 64 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | High-Capacity Cuvette |
| Measurement Mode | Fluorescence Spectroscopy |
| Path Length | 40 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 64 mL |
| External Dimensions | 44 × 44 × 42 mm |
| Cell Body Dimensions | 44 × 44 × 42 mm |
| External Dimensions Scope | Body Only |
| Internal Dimensions | 40 × 40 × 40 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Lid |
| Closure Included | Yes |
| Opening Configuration | Open Top |
Choose this option
Choose C404CR2 when your method uses a 40 mm path and you need more sample space than a small fluorescence cell provides. The 64 mL nominal capacity and 40 × 40 × 40 mm internal chamber suit bulk liquid samples, direct pouring and rinsing, and routines where you want open access during filling and a cover placed afterward.
What makes this option different
- 40 mm optical path for methods set up around a longer observation distance through the sample.
- Four-Way Light configuration, giving side optical access on four faces rather than a single transmission direction.
- Large square 40 × 40 × 40 mm internal chamber with 64 mL nominal capacity.
- Open-top body supplied with a lid for covered handling after loading.
Using this cell
Fill the cell from the top and make sure the liquid level covers the beam region used in your setup. If your method depends on orientation, keep the same face alignment between blank and sample measurements.
Place the lid after filling if your workflow calls for covered handling. The lid is a cover for the opening; it should not be treated as a pressure, leak-tight or gas-tight closure. Handle the cell by non-optical surfaces where possible, and keep the light path faces free from fingerprints, bubbles and droplets.
First-use check
Inspect the optical faces and the lid seating area before first use, and confirm that the cuvette sits squarely in your holder. Run a blank first, verify that the sample fully covers the beam area, and remove trapped bubbles before measurement.
Fit and optical alignment
The body dimensions are 44 × 44 × 42 mm, and these dimensions apply to the cuvette body only, excluding the lid. Check holder width, side clearance and the vertical space you need above the holder for filling and lid placement.
Z Height is not stated for this item. If your instrument depends on a defined beam-center height, check holder and beam alignment before ordering rather than assuming fit from the 40 mm path length alone.
Solvents and cleaning
This cuvette is made from JGS1 quartz. General quartz-cell construction guidance is available here: MQ Cuvette Fabrication Glossary.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. A detailed chemical compatibility list is not established for this exact item, so check suitability first if your sample or cleaning routine involves more demanding chemicals.
Included with this option
One quartz cuvette in the listed specification with lid included.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, and specific tolerances. Send a dimensioned drawing or labelled sketch together with your holder details, wavelength range, sample conditions and target quantity. Discuss your requirements and quote part number C404CR2.
Additional information
| Weight | 100 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.