(C104CE11) Quartz Micro Cuvette, 10 mm / 2 mm (dual path) Path, 700 µL

Weight	30 g

SKU: C104CE11

Original price was: $323.00.Current price is: $291.00.

In Stock

C104CE11 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm main path, 2 mm secondary path and Four-Way Light access. Its 700 µL nominal capacity and supplied lid suit compact fluorescence setups built around this dual-path geometry. Sold as 1 cuvette.

In Stock

SKU: C104CE11 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CE11 is a JGS1 quartz micro cuvette for fluorescence spectroscopy, combining a 10 mm main path with a 2 mm secondary path in a compact Four-Way Light body. The 700 µL nominal capacity and narrow sample region make it suitable when you need this specific fluorescence cell geometry rather than a larger square cuvette. This option is sold as one cuvette and includes a lid.

Path Length: 10 mm / 2 mm (dual path)
Sample Volume (Nominal): 700 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm / 2 mm (dual path)
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	2 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	2 mm

Choose this option

Choose C104CE11 when your method is built around a 10 mm / 2 mm dual-path layout and side optical access around the sample region. The supplied lid helps with routine handling after filling, while the compact uncapped body can be useful where holder space is limited, provided your beam position and clearance match the cell.

What makes this option different

10 mm main path with 2 mm secondary path for methods that use this exact dual-path arrangement.
Four-Way Light geometry for fluorescence setups that use optical access from more than one side.
700 µL nominal capacity in a compact micro cuvette format.
Lid included for routine covered handling after filling.

Using this cell

Fill the cuvette so the illuminated sample region is fully covered, then seat the lid gently on clean contact surfaces. Keep bubbles, residue and fingerprints away from the optical faces, and use the same orientation for blank and sample so the optical layout stays consistent between runs.

The lid is useful for normal handling, but it should not be treated as a pressure-rated or leak-tight closure for inversion, transport or closed-loop flow use. The 700 µL value is nominal capacity, not a minimum working volume, so practical fill level should be set by the beam position in your own instrument.

First-use check

Inspect the cuvette and lid contact area for chips, dust or residue.
Rinse with a cleaning liquid appropriate to your method and dry the outer optical faces gently.
Run a blank to confirm seating, beam alignment and practical fill level before measuring samples.

Fit and optical alignment

The stated external dimensions apply to the uncapped cell body: 12.5 × 12.5 × 45 mm. If your fluorometer or holder has limited vertical space, allow additional clearance for the fitted lid because the installed overall height is not stated here.

Z Height is not stated for this option. If your setup requires a defined beam-center height, please check holder datum and beam position before ordering rather than assuming fit from body size alone.

Solvents and cleaning

This cuvette uses Molded 83 fabrication with an optical-contact supplier construction option. This fabrication is often selected for methods that may involve organic solvents or temperature-controlled work, but the exact chemical limits for this SKU are not stated here.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and check the suitability of your sample and cleaning liquids for the full cuvette-and-lid assembly before use.

Included with this option

One cuvette. Lid included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application.

Prototype batches typically involve 2–4 cells; final feasibility, specifications, quantity, price and production time are confirmed in quotation. Discuss your requirements and quote part number C104CE11.