(C104SE5) Quartz Stoppered Cuvette, 10 mm Path

Weight	30 g

SKU: C104SE5

Original price was: $160.00.Current price is: $144.00.

In Stock

C104SE5 is a JGS1 quartz stoppered cuvette for UV/Vis work with a 10 mm optical path and Four-Way Light configuration. The PTFE closure is included, and this sales option is supplied as 1 cuvette. It suits buyers who want four-side optical access in a covered single-cell format.

In Stock

SKU: C104SE5 Categories: Cuvettes, Products, Quartz Stoppered Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104SE5 is a JGS1 quartz stoppered cuvette for UV/Vis measurements with a 10 mm optical path and Four-Way Light design. It is a useful choice when you want a covered sample cell with optical access from all four sides rather than only one opposing pair. This sales option is supplied as 1 cuvette with its PTFE closure included.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Stoppered Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	3.5 mL
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Material	PTFE
Closure Included	Yes

Choose this option

Choose C104SE5 when your method uses a 10 mm path and the cell orientation or optical arrangement makes four-side access more useful than a Two-Way Light format. The included PTFE closure lets you fill the cell and keep the sample covered during routine handling, while the single-cuvette sales unit suits replacement or one-at-a-time purchasing.

What makes this option different

JGS1 quartz body for UV/Vis spectroscopy.
10 mm optical path for methods specified around a 1 cm cell.
Four-Way Light configuration for optical access on all four sides of the cell body.
PTFE closure included so the cell is supplied with its stopper.
Single-cuvette sales unit for one-at-a-time purchasing or replacement use.

Using this cell

Fill the cuvette so the liquid covers the beam region used in your instrument, then seat the PTFE closure gently before measurement. Keep the optical faces free from fingerprints, droplets and bubbles, and maintain the same orientation for blank and sample when your procedure depends on orientation.

Handle the cell by the non-optical surfaces during filling and placement. A covered top is useful for routine sample handling, but this product should not be treated as a pressure-rated or leak-tested assembly.

First-use check

Inspect the optical faces, top opening and stopper for chips, residue or transport dust.
Rinse with a cleaning method suitable for your sample and procedure.
Fill with a blank solution and confirm that the beam passes through the intended measurement region without bubbles.
Seat the PTFE closure and check handling in the orientation you plan to use.

Fit and optical alignment

This is a stoppered rectangular cuvette with a 10 mm path and Four-Way Light optical access. If your holder has tight clearance above the cell, check that the stoppered format suits the available space.

The exact external dimensions and Z Height are not listed here. For holders with a fixed beam center or strict mechanical limits, check those requirements before ordering. Four-Way Light describes the optical access arrangement only; final suitability still depends on your holder and beam geometry.

Solvents and cleaning

Quartz is commonly selected for UV/Vis sample cells, and you can review general construction approaches in the fabrication glossary. For this exact SKU, the chemical limits of the full cell-and-closure assembly are not established here, so check the sample liquid and cleaning routine against your application if your method is chemically demanding.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and wipe the optical faces with non-abrasive optical tissue.

Included with this option

1 quartz stoppered cuvette with PTFE closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch together with your instrument or holder details, critical dimensions, sample conditions and target quantity. Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation. Discuss your requirements and quote part number C104SE5.