(C104SE11) Glass Particle Analysis Cell, 10 mm Path, 3.5 mL
Original price was: $190.00.$171.00Current price is: $171.00.
Glass particle analysis cell with a 10 mm optical path, 3.5 mL nominal capacity and included closure for visible-range particle-analysis work. Its compact 12 × 12 mm base suits square holder positions where this body format is already specified. This MQ sale is supplied as 1 cuvette.
Description
C104SE11 is a glass particle analysis cell for particle-analysis methods built around a 10 mm optical path in the 350–750 nm range. Its 3.5 mL nominal capacity and compact square footprint make it a practical choice when you need this established cell format for routine filling, holder seating and repeatable visible-range measurements. This MQ sale is supplied as 1 cuvette, with closure included.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 3.5 mL
- Closure Type
- Stopper
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Particle Analysis Cell |
| Measurement Mode | Particle Size Analysis |
| Pack Quantity | 1 Piece |
| Path Length | 10 mm |
| Wavelength Range — Lower Limit | 350 nm |
| Wavelength Range — Upper Limit | 750 nm |
| Sample Volume (Nominal) | 3.5 mL |
| External Dimensions | 12 × 12 × 45 mm |
| Base Dimensions | 12 × 12 mm |
| Material | Glass |
| Closure Type | Stopper |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
Choose this option
Choose C104SE11 when your method uses a 10 mm path and you want a compact glass cell with a 12 × 12 mm base rather than a larger vessel or a different body shape. The 3.5 mL nominal capacity gives you a defined sample region for this format, while the included closure supports covered sample handling during normal bench use. It is also useful when you need a single replacement cell rather than a supplier pack.
What makes this option different
- 10 mm optical path for methods already set up around this path length.
- 3.5 mL nominal capacity in a compact body, so filling and handling stay within a small square cell format rather than a broader bottle-style vessel.
- 12 × 12 mm base footprint for checking holder seating and bench clearance at the cell position.
- Glass construction for visible-range particle-analysis use at 350–750 nm.
- Fused integrated construction, selected when you want this molded body style rather than an adhesive-bonded cell format for routine sample loading and cleaning.
- Closure included for covered use of the sample chamber.
- Sold as 1 cuvette in this MQ offer.
Using this cell
Fill the cell in the normal upright position, then fit the closure and keep the same orientation through blank and sample measurements. With a 3.5 mL nominal capacity, this format suits routine sample loading into a compact sample chamber without moving to a larger body size.
Nominal capacity is not the same as minimum working volume. If your method uses a low fill level or a beam position that sits high or low in the holder, check that the filled sample actually covers the beam in your instrument before routine use.
First-use check
- Inspect the cell and closure for chips, cracks, dust or residue.
- Check that the body seats cleanly in the holder without force.
- Fill with a suitable blank first and verify beam coverage in your instrument.
- Keep the same cell orientation for comparative readings.
Fit and optical alignment
The first fit point to check is the 12 × 12 mm base, which is the holder-seating footprint of the body. The listed external dimensions are 12 × 12 × 45 mm, but the available data does not resolve whether that height includes the closure, so top clearance should be checked on instruments with limited space above the cell position.
Z Height is not established for this SKU. If your instrument depends on a defined beam-center height, confirm that requirement before ordering instead of assuming alignment from the outer size alone.
Solvents and cleaning
Consider the Molded 83 option when reviewing an organic-solvent or temperature-controlled method. For this glass particle-analysis cell, assess the sample and cleaning liquids for the complete cell and accompanying closure under the actual concentration, temperature and contact time.
This glass cell uses a fused integrated construction in the current supplier description, which is a useful selection point when you want this molded cell style for routine wet sample handling and normal cleaning, rather than an adhesive-bonded format. It does not establish a universal chemical or pressure rating for the complete assembly.
Chemical limits for this exact SKU are not established here, so assess the cell and closure together before using aggressive reagents, strong cleaning agents, long soak periods or elevated-temperature cleaning. Keep hydrofluoric acid away from glass, and avoid hot strong alkalis and abrasive cleaning that could damage the optical faces. For background on cell fabrication styles, see fabrication options.
Included with this option
One order supplies 1 glass particle analysis cell. The closure is included.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different path length, capacity, body size or holder-related geometry, we can review a custom JGS1 quartz project separately from this listed glass SKU. Send your drawing or labelled sketch, instrument or holder details, sample conditions and quantity through our contact page, and quote part number C104SE11.
Additional information
| Weight | 30 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.