(C104SE12) Glass Particle Analysis Cell, 10 mm Path, 3.5 mL, Pack of 2

Weight	30 g

SKU: C104SE12

Original price was: $376.00.Current price is: $339.00.

In Stock

Glass particle analysis cell for visible-range work with a 10 mm optical path and 3.5 mL nominal capacity. Its square 12 × 12 mm base format suits this established holder style, and the selected option includes a closure for routine filling and handling. This MQ offer is priced and sold as a pack of 2 cuvettes.

In Stock

SKU: C104SE12 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104SE12 is a glass particle analysis cell for visible-range particle size analysis methods that use a 10 mm optical path. Its 3.5 mL nominal capacity gives you a compact sample region in a square-body format, and the included closure helps with routine filling, carrying and covered handling in this cell style. This MQ offer is priced and sold as a pack of 2 cuvettes.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Particle Analysis Cell
Measurement Mode	Particle Size Analysis
Pack Quantity	Pack of 2
Path Length	10 mm
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	750 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	12 × 12 × 45 mm
Base Dimensions	12 × 12 mm
Material	Glass
Closure Type	Stopper
Closure Included	Yes
Fabrication Method	Molded 83

Choose this option

Choose C104SE12 when your method is built around a 10 mm path in a compact glass cell and you want the convenience of a two-cuvette purchase. The 3.5 mL nominal sample region is useful when you need this established square format for routine particle-analysis preparation, while the included closure supports covered handling between filling and measurement.

What makes this option different

10 mm optical path suits methods and holder positions already set up for this standard path length.
3.5 mL nominal capacity provides a defined compact sample region for routine filling, but it is still a nominal volume rather than a minimum working fill.
12 × 12 mm base footprint gives you the key holder-seating dimension to check first when matching this cell format to an existing instrument slot.
Visible-range use at 350–750 nm fits methods that do not require UV transmission below that range.
Fused integrated construction identifies this selected formed-body style rather than a cell described around separately bonded sections, which matters when you want this particular handling and cleaning format.
Molded 83 is the current fabrication term for this option and is commonly chosen when reviewing methods that may involve organic-solvent or temperature-related process conditions; suitability still depends on the complete cell assembly, closure and actual exposure conditions.
Closure included; priced as a pack of 2 means the current MQ sale unit is two complete cell assemblies in this listed offer.

Using this cell

Fill each cell according to your own procedure and keep the same orientation through blank, background and sample readings. The 3.5 mL figure describes nominal capacity, so it should not be treated as a stated minimum working volume; your actual fill still needs to cover the beam position used in your instrument.

If you use the closure during handling or measurement, seat it consistently each time. Before placing the cell in the holder, clean the optical faces and remove exterior droplets, fingerprints or residue that could affect comparative readings.

First-use check

Inspect each glass body and closure for chips, cracks, dust or residue.
Check that each cell seats fully and squarely in the holder without force.
Rinse according to your laboratory procedure before first measurement.
Run a fresh blank or background and keep one consistent orientation for comparative work.

Fit and optical alignment

The base footprint is 12 × 12 mm, which is the most direct holder-fit check for this cell style. The listed external dimensions are 12 × 12 × 45 mm, but the available data does not resolve whether the 45 mm height includes the closure, so overhead clearance should be checked where vertical space is limited.

Z Height is not established for this SKU. If your instrument depends on a defined beam-center height, confirm that point before ordering rather than assuming fit from the square body size alone.

Solvents and cleaning

This glass cell uses fused integrated construction and is identified here under the Molded 83 fabrication term. In practical selection, that term is useful when you are reviewing methods with organic-solvent or temperature-related process considerations, but the actual suitability still needs to be judged for the complete cell and closure together under your concentration, temperature and contact-time conditions.

Keep hydrofluoric acid away from glass. Avoid hot strong alkalis and abrasive cleaning that could mark the optical faces or damage the closure-contact surfaces. For general fabrication terminology, see https://machinedquartz.com/fabrication-method-of-cuvettes/.

Included with this option

Supplied as a pack of 2 glass particle analysis cells in the current MQ commercial offer. A closure is included with the selected option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, capacity, body size or holder-related geometry, we can review a custom JGS1 quartz project separately from this listed glass SKU. Send your drawing or labelled sketch, instrument or holder details, sample conditions and quantity through https://machinedquartz.com/contact/, and quote part number C104SE12.