(C50.82CS) Quartz Colorimetric Cuvette, 50.8 mm Path, 30 mL

Weight	100 g

SKU: C50.82CS

Original price was: $84.00.Current price is: $76.00.

In Stock

C50.82CS is a quartz colorimetric cuvette with a 50.8 mm optical path, an open-top body and 30 mL nominal capacity. Its longer rectangular body suits methods that use this path length and need direct manual filling. Supplied as 1 cuvette.

In Stock

SKU: C50.82CS Categories: Cuvettes, Products, Quartz High-Capacity Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C50.82CS is a quartz colorimetric cuvette for methods that use a 50.8 mm optical path. The open-top body and 30 mL nominal capacity suit larger prepared sample volumes, while the longer rectangular format gives you the key geometry to check before placing it into an instrument holder. This option is sold as one cuvette.

Path Length: 50.8 mm
Sample Volume (Nominal): 30 mL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Colorimetric Cuvette
Measurement Mode	Colorimetry
Pack Quantity	1 Piece
Path Length	50.8 mm
Sample Volume (Nominal)	30 mL
External Dimensions	54.8 × 20 × 40 mm
Cell Body Dimensions	54.8 × 20 × 40 mm
External Dimensions Scope	Body Only
Body Height	40 mm
Base Dimensions	54.8 × 20 mm
Material	Quartz
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose this cuvette when your method is built around a 50.8 mm path and your holder can accept a longer body than compact colour cells. The open chamber keeps filling, pouring and rinsing straightforward, and the 30 mL nominal capacity fits workflows that already use a larger sample volume rather than a micro-scale fill.

What makes this option different

50.8 mm optical path for colour measurement methods that use this longer transmission distance.
30 mL nominal capacity for larger prepared sample fills.
Open-top body for direct loading, emptying and repeat rinsing.
54.8 × 20 × 40 mm body size that needs more holder length than shorter rectangular cuvette formats.

Using this cell

Fill the cell from the top so the liquid fully covers the beam during measurement. Remove visible bubbles before reading, and use the same orientation for blank and sample runs if your procedure depends on consistent positioning.

The open chamber helps with manual handling and rinsing between samples, but it also means you should pour carefully and keep liquid off the outside optical faces. Hold the cuvette by the non-optical surfaces where possible.

First-use check

Inspect the optical faces, corners and rim on arrival, then test the empty cuvette in the holder for seating and clearance. Before routine work, run a blank or method-appropriate liquid to confirm that the filled sample region sits correctly in the beam path.

Fit and optical alignment

The nominal body dimensions are 54.8 × 20 × 40 mm, and these dimensions apply to the body only. Check the holder footprint, entry width and available body length carefully before ordering, because the longer body may be the deciding fit issue in a compact instrument.

Z Height is not established for this SKU, so outer size does not establish beam-height compatibility. The stated 30 mL is nominal capacity, not a minimum working volume.

Solvents and cleaning

This cuvette uses quartz, but the chemical limits for this exact SKU are not specified here. Choose cleaning and sample-contact conditions according to your method instead of assuming a universal compatibility range.

For general fabrication background across cuvette types, see Compare fabrication options. Wipe the outer optical faces gently with non-abrasive optical tissue and avoid abrasive cleaning that could mark the clear surfaces.

Included with this option

Supplied as 1 cuvette.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, body size, capacity, opening style or other fit-related change, we can review a custom version. Send a drawing or labelled sketch, your holder or instrument details, the critical dimensions and your sample conditions. Discuss your requirements and quote part number C50.82CS.