
6 mm Plano-Convex Quartz Lens: Focal Length, Orientation and Mounting
CUSTOM DESIGN GUIDE · MQOLE005
MQOLE005 is a JGS1 plano-convex quartz lens with 6 mm diameter and nominal 13.5 mm focal length in the product reference. One face is flat and the other curved. The lens is selected by its optical role, then mounted without allowing the retaining edge to obscure the useful beam.

Use and purpose · Specifications · In practice · Custom example · Buy or enquire
A lens changes the beam; a window mainly provides access
The curved face distinguishes a plano-convex lens from a flat optical window. In a proposed focusing or collimating arrangement, focal specification and face orientation belong to the optical layout. Diameter alone identifies the size of the part, not the required beam behaviour.
As a general singlet-lens principle, a plano-convex lens used to focus a collimated beam is commonly oriented with the curved face toward that beam to reduce spherical aberration. The relevant orientation follows the actual source and image arrangement; it is not simply whichever side is easier to mount. [1]
MQOLE005 configuration
Focal length is not a mechanical gap from an unspecified surface
The reference nominal focal length is 13.5 mm. An assembly drawing also needs a defined lens position and the required source or detector location. These are not interchangeable descriptions of the same distance.
A custom optical brief can specify wavelength and the intended focal requirement alongside the lens form. Surface, coating and optical tolerances are additional requirements; the JGS1 designation alone does not supply them or establish measured performance for the assembled system.
The mount takes space from the clear region
The 6 mm outside diameter meets the lens seat. A retaining ring or edge contact occupies part of that perimeter, leaving a smaller usable opening for the beam. The required clear aperture should therefore be shown inside the mounting outline.
This separates two useful custom questions. One concerns keeping a lens compatible with an existing seat; the other concerns the optical prescription. A design can retain the first while changing the second, provided both remain explicit in the request.
A custom example: retain the seat and change the focal requirement
ILLUSTRATIVE DESIGN EXAMPLE
Suppose a compact instrument has a fixed lens seat but requires a different optical arrangement. A proposed lens can retain the outside mounting interface while defining the wavelength, focal specification and clear aperture for the new layout. The drawing identifies the flat and curved faces so the mounting brief follows the intended optical orientation.
Order the listed configuration or discuss a change
View MQOLE005 and current pricing. For a custom version, send a labelled sketch that separates the features to retain from the changes you want.
Reference MQOLE005 with the source and image arrangement, wavelength, focal requirement and face orientation. Include the lens-seat section, clear aperture and optical surface requirements, then add quantity, destination and requested date.





Recent Comments