(C052CA3) Glass Standard Cuvette, 5 mm Path, 1.75 mL

Weight	30 g

SKU: C052CA3

$4.00

In Stock

C052CA3 is a glass standard cuvette for visible absorbance work with a 5 mm optical path and 1.75 mL nominal capacity. Its open-top, Two-Way Light design gives direct filling access, and this sales option is supplied without a lid. Supplied as 1 cuvette per listed price unit.

In Stock

SKU: C052CA3 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C052CA3 is a glass standard cuvette for visible absorbance measurements from 350 to 2000 nm. It combines a 5 mm optical path with a 1.75 mL nominal capacity in an open-top body, making it a practical choice when you want direct pipetting and rinsing without a closure in the way. The Two-Way Light layout keeps the measurement path to the usual straight-through direction across opposing optical faces.

Path Length: 5 mm
Sample Volume (Nominal): 1.75 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	Visible Absorbance Spectroscopy
Pack Quantity	1 Piece
Path Length	5 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	2000 nm
Sample Volume (Nominal)	1.75 mL
External Dimensions	7.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	7.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Glass
Closure Type	Lid
Closure Included	No
Opening Configuration	Open Top

Choose this option

Choose C052CA3 when your method uses a 5 mm path and you want an open standard cuvette supplied without a lid. The 1.75 mL nominal capacity gives you a compact sample chamber in a standard rectangular body, and the visible-range glass construction suits routine absorbance work within the stated wavelength range.

What makes this option different

5 mm optical path for methods specified at this shorter standard path length.
1.75 mL nominal capacity in a compact standard cuvette body.
Open-top access for direct filling, emptying and rinsing.
No lid included with this sales option.
Two-Way Light layout for straight-through measurement through opposing optical faces.
Uncapped body dimensions of 7.5 × 12.5 × 45 mm for holder and clearance checks.

Using this cell

Fill from the top and keep the liquid level high enough to cover the beam during measurement. Remove visible bubbles before reading, and keep the same orientation for blank and sample if your method depends on repeatable positioning.

Because this version is supplied without a lid, it suits open bench measurement rather than covered handling. The nominal 1.75 mL capacity is not a minimum working volume, so beam coverage should be checked in your instrument if the fill condition matters to the method.

First-use check

Inspect the optical faces for chips, scratches, dust or dried residue.
Test the empty cell in your holder to confirm seating and beam position.
Rinse with a suitable liquid for your method before the first sample run.
Run a blank and confirm that the filled sample covers the beam normally.

Fit and optical alignment

The stated dimensions of 7.5 × 12.5 × 45 mm apply to the uncapped cell body. These are the useful dimensions for checking holder seating, side clearance and the amount of vertical space available above the open top.

This is a Two-Way Light cuvette for straight-through absorbance measurements, not a side-access optical cell. Z Height is not specified here, so setups with a fixed or critical beam height should be checked before ordering.

Solvents and cleaning

This glass cell is described by the supplier as using fused integrated construction. That construction term helps identify the style of assembly, but it does not establish a full chemical compatibility list for the exact cell and liquids you plan to use.

Chemical limits for this exact option are not established here, so if your samples or cleaning routine involve aggressive chemicals, organic solvents, heated cleaning or extended contact time, please check suitability before use. Avoid abrasive cleaning on the optical faces. For general fabrication background, see https://machinedquartz.com/fabrication-method-of-cuvettes/.

Included with this option

Supplied as 1 glass cuvette. No lid is included with this option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication requirements. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. If you need a different fit or material, please https://machinedquartz.com/contact/ and quote part number C052CA3.