(C062CS2) Glass Standard Cuvette, 6 mm Path, 540 µL

Weight	30 g

SKU: C062CS2

Original price was: $13.00.Current price is: $12.00.

In Stock

C062CS2 is a glass standard cuvette with a 6 mm optical path, 540 µL nominal capacity and an open-top body for direct filling. Its Two-Way Light layout supports a defined straight measurement path. Supplied as 1 cuvette per listed price unit.

In Stock

SKU: C062CS2 Categories: Cuvettes, Glass Cuvettes, Products Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C062CS2 is a glass standard cuvette with a 6 mm optical path and 540 µL nominal capacity. The open-top body gives direct access for pipetting, rinsing and quick sample changes, while the Two-Way Light layout keeps the optical path to one straight measurement direction through opposing faces. This option is suited to visible and near-IR work within the stated 350 to 2500 nm range for this exact cell.

Path Length: 6 mm
Sample Volume (Nominal): 540 µL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	Biochemical Analysis
Path Length	6 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	350 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	540 µL
External Dimensions	6.3 × 8 × 30 mm
Uncapped Cell Dimensions	6.3 × 8 × 30 mm
External Dimensions Scope	Uncapped Cell
Body Height	30 mm
Base Dimensions	6.3 × 8 mm
Material	Glass
Fabrication Method	Standard 80
Opening Configuration	Open Top

Choose this option

Choose C062CS2 when your method needs a 6 mm path in a compact open cuvette rather than a full-size standard body. The 540 µL nominal capacity helps with smaller routine fills, and the open top makes this option practical where direct sample loading and thorough rinsing matter between runs.

What makes this option different

6 mm optical path for methods built around a shorter absorbance path.
540 µL nominal capacity in a compact standard cuvette format.
Open-top access for pipetting, emptying and rinsing without removing a closure.
Two-Way Light configuration for straight-through measurement through opposing optical faces.
Uncapped outer dimensions of 6.3 × 8 × 30 mm for holder and clearance checks.
Sold as 1 cuvette per listed price unit.

Using this cell

Fill from the open top and make sure the liquid covers the beam during measurement. Remove visible bubbles before reading, and keep the same orientation for blank and sample if your method depends on consistent presentation of the optical faces.

The stated 540 µL is the nominal capacity of the cell, not a minimum working volume. If your setup is sensitive to beam height or liquid level, check the actual filled condition in your holder before routine use.

First-use check

Inspect the optical faces and top opening for dust, chips or residue.
Test the empty cell in your holder to confirm seating.
Rinse with a suitable liquid before first use.
Run a blank and confirm the beam passes through the intended optical faces.

Fit and optical alignment

The uncapped cell measures 6.3 × 8 × 30 mm, with a 6.3 × 8 mm base footprint. This compact body can be useful where holder space is limited, but fit should still be checked against your slot size, insertion depth and surrounding clearance.

This is a Two-Way Light cuvette, not a side-access observation cell. Z Height is not specified for this model, so a holder match should not be assumed from path length and outer size alone where the beam center is fixed.

Solvents and cleaning

This is an adhesive-bonded Standard 80 glass cell. That construction is commonly chosen for routine room-temperature aqueous work, so if your samples or cleaning steps involve organic solvents, heated liquids or extended contact time, check suitability for this exact cell before use.

Keep hydrofluoric acid away from glass. Avoid hot strong alkalis and abrasive cleaning on the optical faces. Clean gently with non-abrasive optical tissue and a suitable liquid for your method.

Included with this option

1 cuvette per listed price unit. Confirm supplied closure details before ordering if your setup requires one.

Availability and ordering

Order this listed specification directly, or ask about current availability and dispatch. If your delivery date is important, ask before checkout; preparation or production time is separate from transit and customs clearance.

Discuss a custom version

For a different design, https://machinedquartz.com/contact/. A custom JGS1 quartz alternative is a separate product enquiry. Please send a drawing or describe the dimensions, holder geometry and sample conditions that matter for your application.