(MQQCU003) Quartz Rectangular Sample Cell, 10 mm path, 5.5 mm Access Hole
$197.00
JGS1 quartz rectangular sample cell for UV/Vis work with a 10 mm optical path and a Two-Way Light layout. Its open top with 5.5 mm offset access holes gives more defined approach space for filling, sampling or probe access than a plain top opening alone, while the 22.5 × 12.5 × 27 mm body stays compact in fixtures. Sold as 1 piece.
Description
MQQCU003 is a JGS1 quartz rectangular sample cell for UV/Vis measurements with a 10 mm optical path and a compact 22.5 × 12.5 × 27 mm body. Its open top and 5.5 mm offset access holes give direct access to the sample region from more than one approach direction, which is useful when filling, sampling or probe placement needs defined clearance around the cell.
- Path Length
- 10 mm
- Cell Type
- Rectangular Sample Cell
- Opening Configuration
- Open Top with Offset Access Holes
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| External Dimensions | 22.5 × 12.5 × 27 mm |
| Body Height | 27 mm |
| Base Dimensions | 22.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Opening Configuration | Open Top with Offset Access Holes |
| Pack Quantity | 1 Piece |
| Wall Thickness | 2 mm |
| Package Contents | 1 × Quartz Rectangular Sample Cell |
Choose this option
Choose this cell when you need a 10 mm transmission cell but also need practical access around the sample area. The open top supports direct loading from above, while the offset side holes add a second approach path that can help with pipettes, probes or other slim tools in a compact fixture. The supplier describes the body as fused-integrated construction, which suits buyers looking for this specific assembled form rather than a separate cap, stopper or threaded connection style.
What makes this option different
- Open top with offset access holes gives direct access from above plus side-entry approach points around the sample region.
- 5.5 mm access-hole size helps you judge whether your pipette tip, probe or loading tool can approach through the side openings.
- Marked 6 mm edge spacing around the access opening is useful when checking nearby fixture parts and hand clearance at the top of the cell.
- Two-Way Light layout supports transmission measurements through the opposing optical faces.
- 10 mm optical path keeps this option in a familiar rectangular transmission-cell format for UV/Vis work.
- Fused-integrated construction (supplier term) identifies this as a fixed assembled quartz body rather than a cell defined by a removable threaded or stoppered closure format.
- Compact 22.5 × 12.5 × 27 mm body helps when the holder area is limited and surrounding access still matters.
Using this cell
Load the sample from the open top or through the offset access holes according to your handling method. This layout can be useful when top access is partly obstructed by nearby fixture parts, or when your tool needs to approach the sample region from a defined side position.
During measurement, keep the intended optical faces clean and make sure the illuminated region is fully covered by liquid. Use the same orientation for blank and sample runs, and remove bubbles from the beam path before reading.
First-use check
- Inspect the optical faces, top opening and access holes for chips, residue or handling damage.
- Place the cell in the holder and confirm the beam passes through the intended optical faces.
- Check that your loading or probe approach clears the top edge and access-hole area as planned.
- Run a suitable blank and verify that the illuminated region is fully filled and free of bubbles.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
Check the 22.5 × 12.5 × 27 mm body against your holder opening, seating area and any parts close to the top of the cell. The drawing also shows the 5.5 mm access-hole size and the marked 6 mm edge spacing, which are useful when planning approach clearance for loading tools or probes.
Z Height is not specified for this cell. The marked 6 mm dimensions describe access-hole placement, not beam-center height, so instruments with critical beam-position requirements should be checked separately.

Solvents and cleaning
The specific chemical limits for this exact assembly are not established here. If your process involves aggressive reagents, organic solvents, elevated temperature or long contact time, review suitability for the complete cell and your actual cleaning method before ordering.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaners, and wipe the optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Rectangular Sample Cell. The listed price is for one cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to body dimensions, optical path, opening layout, access-hole geometry and related installation details. If you need a different access arrangement or a body matched to your holder, send a drawing or labelled sketch together with your application details.
Send a product-selection enquiry with SKU MQQCU003 and your fit requirements.
Design notes for this configuration: Quartz Cuvette with an Offset Hole: Locating the Opening from a Datum
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.