(MQQFC015) Quartz Rectangular Sample Cell, 1/5 mm Dual Path, 130 µL, Open at Both Ends
$768.00
Quartz rectangular sample cell with dual 1 mm and 5 mm optical paths, Six-Way Light access and 130 µL nominal capacity. This JGS1 cell uses Standard 80 adhesive-bonded construction and is open at both ends for custom mounting or sealing. Sold as 1 piece.
Description
MQQFC015 combines two stated optical paths, 1 mm and 5 mm, in one compact JGS1 quartz sample cell. Its 130 µL nominal capacity, Six-Way Light layout and open-ended rectangular body suit methods that need a small chamber and a defined choice between two measurement directions within the same cell format.
This is a cell body for use in a separately designed holder or sealing arrangement, not a ready-connected assembly. Because the selected orientation determines which path length you are using, the installed direction should be controlled and kept consistent in the method.
- Path Length
- 1 mm / 5 mm (dual path)
- Sample Volume (Nominal)
- 130 µL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 1 mm / 5 mm (dual path) |
| Light Transmission Configuration | Six-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 130 µL |
| External Dimensions | 21 × 10 × 26 mm |
| Body Height | 26 mm |
| Base Dimensions | 21 × 10 mm |
| Internal Dimensions | 5 × 1 × 26 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC015 when your setup needs both a very short 1 mm path and a 5 mm secondary path in one compact rectangular cell. It is useful when you want to work with the same chamber but measure in different optical directions, while keeping filling, support and end treatment under your own fixture design.
What makes this option different
- Dual 1 mm and 5 mm optical paths in one rectangular sample cell body.
- Six-Way Light provides optical access from multiple sides without implying six separate measurement channels.
- 130 µL nominal capacity in a compact chamber format for small-volume work.
- Standard 80 construction is an adhesive-bonded quartz format suited to routine room-temperature aqueous samples and buffers.
Using this cell
Install the cell so the selected optical direction is clearly identified in your setup notes and remains the same between blank and sample measurements. If your method uses both stated path lengths, define when each orientation is used and handle the cell consistently during each step.
For liquid work, establish the end-sealing, filling and bubble-removal procedure with your holder before measurement. The 130 µL value is the nominal cell volume; it does not define a minimum working volume for every mounting arrangement.
First-use check
- Inspect the optical faces, edges and chamber opening for chips, residue or contamination.
- Run a blank in the intended orientation to verify alignment and sample retention.
- Confirm that the chosen path direction is recorded and that bubbles are removed before measurement.
Fit and optical alignment
Check your fixture against the 21 × 10 × 26 mm outer dimensions. The listed 5 × 1 × 26 mm internal dimensions describe the chamber space, not the holder opening, and the body should be supported without point loading on the optical faces.
Z Height is not listed for this SKU. If your instrument requires a defined beam-center height, check that geometry from the actual holder and beam position rather than from the body height alone.

Solvents and cleaning
This SKU uses Standard 80 adhesive-bonded construction. It is suited to routine room-temperature aqueous samples and buffers. Avoid organic samples and organic cleaning solvents with this bonded assembly. If your method requires organic solvents or heated treatment, ask about a more suitable Sintered or Molded alternative before ordering.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 rectangular sample cell, SKU MQQFC015. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also coordinate custom JGS1 quartz projects for requirements involving other path combinations, chamber sizes, body dimensions or holder-related geometry. Send a drawing or labelled sketch with the critical dimensions, sample conditions and target quantity if you need a different design.
Send a product-selection enquiry with SKU MQQFC015 and your holder or application details.
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.