(MQQFC016) Quartz Rectangular Sample Cell, 1/25 mm Dual Path, 1.3 mL, Open at Both Ends
$299.00
Quartz rectangular sample cell with dual 1 mm and 25 mm optical paths, Four-Way Light access and 1.3 mL nominal capacity. This JGS1 cell uses Standard 80 adhesive-bonded construction and is open at both ends for custom mounting or sealing. Sold as 1 piece.
Description
MQQFC016 combines a very short 1 mm path and a much longer 25 mm secondary path in one JGS1 quartz sample cell. Its Four-Way Light layout, 1.3 mL nominal capacity and elongated internal chamber make it useful when you want two stated optical directions in the same rectangular body while keeping the end treatment under your own fixture design.
This item is an open-ended sample cell body rather than a complete connected assembly. Because the chosen measurement direction changes the path length in use, the holder and operating procedure should keep the cell orientation fixed and repeatable.
- Path Length
- 1 mm / 25 mm (dual path)
- Sample Volume (Nominal)
- 1.3 mL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 1 mm / 25 mm (dual path) |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 1.3 mL |
| External Dimensions | 31 × 11 × 55 mm |
| Body Height | 55 mm |
| Base Dimensions | 31 × 11 mm |
| Internal Dimensions | 25 × 1 × 55 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC016 when your method needs both a 1 mm path and a 25 mm secondary path in one rectangular quartz cell. It suits applications that use the same chamber format for different optical directions, while allowing you to build the support, sealing and filling arrangement around the 31 × 11 × 55 mm body.
What makes this option different
- Dual 1 mm and 25 mm optical paths in one open-ended rectangular cell body.
- Four-Way Light provides optical access from four sides of the body.
- 1.3 mL nominal capacity with an elongated 25 × 1 × 55 mm internal chamber.
- Standard 80 construction is an adhesive-bonded quartz format suited to routine room-temperature aqueous samples and buffers.
Structure and dimensions

Using this cell
Use the cell with a holder that keeps the selected measurement orientation defined and repeatable. If your method uses both stated path lengths, document which direction is used for each step so blank and sample are measured in the same way.
For liquid measurements, establish the end-sealing, filling and bubble-removal routine in the final assembly before use. The 1.3 mL figure is the nominal cell volume and does not establish a minimum working volume for every installation.
First-use check
- Inspect the optical faces, chamber opening and end edges before installation.
- Verify alignment and sample retention with a blank in the intended orientation.
- Remove bubbles and exterior liquid films before recording measurements.
Fit and optical alignment
Check fixture clearance against the 31 × 11 × 55 mm exterior dimensions. The listed 25 × 1 × 55 mm internal dimensions describe the chamber itself, not the holder opening, so support should be based on the outside body and should avoid concentrated clamping on the optical faces.
Z Height is not listed for this SKU. If your instrument or mount depends on a defined beam-center height, confirm that geometry from the installed holder and beam path rather than assuming fit from overall body height.

Solvents and cleaning
This SKU uses Standard 80 adhesive-bonded construction. It is suited to routine room-temperature aqueous samples and buffers. Avoid organic samples and organic cleaning solvents with this bonded assembly. If your method involves organic solvents or heated treatment, ask about a more suitable Sintered or Molded alternative before ordering.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 rectangular sample cell, SKU MQQFC016. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also coordinate custom JGS1 quartz projects for requirements involving different path combinations, chamber dimensions, body size or holder-related geometry. Send a drawing or labelled sketch with the critical dimensions, sample conditions and target quantity if you need a modified version.
Send a product-selection enquiry with SKU MQQFC016 and your holder or application details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.