(MQQFC042) Quartz Rectangular Sample Cell, 1.5/1 mm Dual Path, 66 µL, Open at Both Ends
Description
MQQFC042 is a JGS1 quartz rectangular sample cell with two optical directions in one compact body: 1.5 mm and 1 mm. Its Four-Way Light layout gives optical access across both crosswise directions, while the 66 µL nominal capacity suits a small rectangular sample chamber rather than a full-size cuvette body. The cell is open at both ends, so the fixture determines how the sample is retained and how the body is supported in use.
- Path Length
- 1.5 mm / 1 mm (dual path)
- Sample Volume (Nominal)
- 66 µL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 1.5 mm / 1 mm (dual path) |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 66 µL |
| External Dimensions | 5.5 × 5 × 44 mm |
| Body Height | 44 mm |
| Base Dimensions | 5.5 × 5 mm |
| Internal Dimensions | 1.5 × 1 × 44 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC042 when you want a very small rectangular chamber and need to select between two defined crosswise path lengths in the same installed cell body. This is a useful format when orientation is part of the method and the holder already provides the end support or sealing arrangement.
What makes this option different
- Dual 1.5 mm and 1 mm paths in one body, so measurement orientation matters.
- Four-Way Light layout for optical access through both crosswise directions.
- 66 µL nominal capacity in a compact rectangular chamber.
- Open at both ends for use in a separately designed fixture rather than as a self-contained assembly.
- Molded 83 fabrication for applications that may involve organic-solvent methods or elevated-temperature work, subject to the full assembly and chemical conditions.
Structure and dimensions

Using this cell
Decide before measurement which optical direction your method will use, then keep that orientation consistent for blanks and samples. Because both path lengths are in the same body, clear marking or a repeatable mounting position helps avoid switching directions by mistake.
For liquid work, filling, end retention and bubble control belong to the complete fixture. This SKU is an open-through sample cell body, not a finished flow cell and not a stoppered cuvette.
First-use check
- Inspect the optical faces, chamber and end edges for residue or handling damage.
- Identify the measurement orientation you intend to use and mark or record it.
- Verify fit, alignment and sample retention with a blank before routine measurements.
Fit and optical alignment
The external body measures 5.5 × 5 × 44 mm, which is useful when mounting space is tight. The internal 1.5 × 1 × 44 mm dimensions describe the chamber geometry and the available path directions; use the external dimensions for holder fit.
Z Height is not listed for this SKU, so beam-height matching should be checked in the actual fixture rather than assumed from the overall height. Support the long narrow body evenly and avoid clamping directly across the optical faces.

Solvents and cleaning
Molded 83 is suitable for methods that may involve organic solvents or elevated temperatures, but actual compatibility still depends on the liquid, concentration, temperature, contact time and the materials used in the rest of the mounted assembly.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the optical faces gently with suitable non-abrasive laboratory wipes, and check that any separate seals or end parts match your cleaning routine.
Included with this option
1 rectangular sample cell, SKU MQQFC042. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also coordinate custom JGS1 quartz projects when you need a different path combination, chamber geometry, external envelope or mounting-related detail. Send a drawing or labelled sketch together with beam direction, holder information, sample conditions and quantity.
Send a product-selection enquiry with SKU MQQFC042 and your application details.
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.