(MQQHC002) Quartz High-Capacity Cuvette, 420 mL nominal capacity, One Clear Face, Three Frosted Sides
Description
MQQHC002 is a high-capacity quartz sample cell for UV/Vis measurements that need a large open chamber and one defined viewing face. Its 420 mL nominal capacity, open-top access and one clear optical side make it easier to plan filling, orientation and bench placement for larger-volume samples. The JGS1 quartz body is supplied as a single cell with three frosted sides and 3 mm walls.
- Sample Volume (Nominal)
- 420 mL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Light Transmission Configuration | Single Optical Face |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 420 mL |
| Cell Body Dimensions | 80 × 80 × 80 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Wall Thickness | 3 mm |
| Package Contents | 1 × Quartz Rectangular Sample Cell |
Choose this option
Choose MQQHC002 when you need a large rectangular quartz cell with direct top access and a single optical viewing direction. This layout suits methods where you want to orient one clear face toward the beam, while the other three side faces are frosted rather than used as additional optical windows. The open top also leaves the sample chamber easy to fill, empty and rinse by hand.
What makes this option different
- 420 mL nominal capacity for larger sample volumes in a single chamber.
- One clear optical face with three frosted sides, so the cell has a defined measurement side rather than all-around optical access.
- Open-top construction for direct filling and cleaning without ports or fittings.
- JGS1 quartz body with 3 mm wall thickness and Standard 80 adhesive-bonded construction.
Using this cell
Fill the chamber from the top and place the clear face toward the optical path used by your instrument or measurement stand. For repeatable setup, keep the same face and the same seating orientation for blank and sample measurements.
Before measurement, make sure the illuminated region is fully covered by liquid and that bubbles are not sitting in the viewing area. After filling, wipe the outside of the clear face carefully so droplets, fingerprints or residue do not affect the optical reading.
First-use check
- Inspect the clear face, frosted sides and chamber edges for chips, residue or transport contamination.
- Place the cell in your intended holder or support and confirm stable positioning.
- Orient the clear face to the optical path and run a blank in that same orientation.
- Check that the liquid level covers the measurement region without trapped bubbles.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The confirmed body dimensions of the cell body are 80 × 80 × 80 mm. Check holder clearance, support area and the space above the open top for filling, pipetting or pouring, and cleaning access.
Z Height is not established for this SKU, so beam position should be checked against your actual holder or measurement setup instead of being inferred from the body size. If your instrument has a fixed beam height or a restricted compartment, confirm the supported cell position before ordering.

Solvents and cleaning
This cell uses Standard 80 adhesive-bonded quartz construction. This type is commonly chosen for room-temperature water-based samples and buffer solutions.
Avoid organic samples and organic cleaning solvents with this adhesive-bonded cell. Do not use hydrofluoric acid with quartz, and avoid hot strong alkalis and abrasive cleaning methods. Rinse promptly after use and clean the outside optical face with a non-abrasive optical tissue or other gentle lint-free material.
Included with this option
1 Quartz Rectangular Sample Cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also handle custom quartz cuvette enquiries for dimensions, optical path length, sample volume, optical windows, Z Height and fabrication requirements. If you need a modified version, please send your drawing or key dimensions and we can review the project separately.
Send a product enquiry with SKU MQQHC002, your setup details and required quantity.
Additional information
| Weight | 500 g |
|---|
You must be logged in to post a review.












Reviews
There are no reviews yet.