(MQQMC020) Quartz Ultra-Micro Cuvette, 10 mm path, 150 µL nominal capacity, 1 mm Side Slit
Description
MQQMC020 is a JGS1 quartz Ultra-Micro Cuvette for UV/Vis methods that need a 10 mm optical path in a compact body with optical access on four sides. This version combines a 150 µL nominal capacity, an open-top chamber and a 1 mm side slit, so it is suited to setups where sample loading is direct and the body geometry around the holder needs attention.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 150 µL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Ultra-Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 150 µL |
| External Dimensions | 12.5 × 12.5 × 45 mm |
| Cell Body Dimensions | 12.5 × 12.5 × 45 mm |
| External Dimensions Scope | Body Only |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Ultra-Micro Cuvette |
Choose this option
Choose MQQMC020 when you need a small-volume UV/Vis cell with Four-Way Light access rather than a simple straight-through two-face layout. The open top gives direct access for filling and inspection, while the 150 µL nominal capacity offers more room than smaller ultra-micro chambers without moving to a larger body format.
What makes this option different
- Four-Way Light configuration provides optical access on four sides for suitable beam arrangements.
- 10 mm path with 150 µL nominal capacity keeps a standard optical path in an ultra-micro format.
- Open-top chamber allows direct pipette filling and visual checking before measurement.
- 1 mm side slit should be checked where holder features or accessory clearances are tight around the cell body.
- 12.5 × 12.5 × 45 mm body fits a compact square cuvette footprint for holder planning.
- Standard 80 adhesive-bonded construction is commonly chosen for room-temperature aqueous samples and buffer solutions.
Structure and dimensions

Using this cell
Fill the cell from the open top and make sure the liquid level covers the measurement region during use. Use the same orientation for blank and sample, and inspect the chamber for bubbles before placing the cell in the holder.
The 150 µL figure is a nominal capacity, not a stated minimum working volume. If your method depends on a specific beam height or a tightly defined illuminated region, check those points in your own setup rather than relying on body height alone.
First-use check
- Inspect the optical faces and chamber for chips, residue or visible contamination.
- Test holder fit and beam alignment with a suitable blank before running samples.
- Confirm that the filled sample covers the measurement area and that no bubbles remain in the light path.
Fit and optical alignment
View the English selection reference. Also available in the product gallery.
The body dimensions are 12.5 × 12.5 × 45 mm. Check holder clearance, beam entry position and access around the cell body, especially if the 1 mm side slit affects how the cell sits in your fixture.
Z Height is not established for this option. If your instrument requires a defined beam-center height from the cell base, confirm that separately before ordering.

Solvents and cleaning
This cell uses Standard 80 adhesive-bonded quartz construction. It is commonly chosen for room-temperature water-based samples and buffer solutions. If your method involves organic solvents, aggressive liquids, heat or prolonged soaking, check the suitability of the complete cell assembly before use.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean gently with suitable non-abrasive materials, and avoid cleaning routines that may be harsh on the bonded assembly.
Included with this option
1 Quartz Ultra-Micro Cuvette. The listed price is for one cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows, opening details and fabrication requirements. If your holder needs a specific beam height, send a dimensioned drawing or sketch with the critical dimensions and tolerances marked.
Send a product-selection enquiry with SKU MQQMC020 and your holder, sample and timing requirements.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.