(MQQMC051) Quartz Ultra-Micro Cuvette, 10 mm path, 50 µL nominal capacity, Black-Wall 6Q Cell

Weight	50 g

SKU: MQQMC051

Product structure and the listed configuration.

Quartz Ultra-Micro Cuvette, 10 mm path, 50 µL nominal capacity, Black-Wall 6Q Cell

$1,128.00

In Stock

MQQMC051 is a JGS1 quartz Ultra-Micro Cuvette for UV/Vis work with a 10 mm path, 50 µL nominal capacity and Two-Way Light access. Its open-top body, 2 × 2.5 mm window area and 8.5 mm Z Height suit setups that need a very small sample region at a defined beam position. Sold as 1 piece.

In Stock

SKU: MQQMC051 Categories: Cuvettes, Products, Quartz Micro Cuvettes Tags: 10 mm path length, 50 uL capacity, Black quartz ultra-micro cuvette, Cuvettes, One-piece construction, Two-Way Light

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQMC051 is a JGS1 quartz Ultra-Micro Cuvette for UV/Vis measurements that need a 10 mm optical path in a very small sample format. This option combines a 50 µL nominal capacity with an open top, Two-Way Light access and an 8.5 mm Z Height, making it useful when your method depends on a compact illuminated region and a known beam height from the cell base.

Path Length: 10 mm
Sample Volume (Nominal): 50 µL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Ultra-Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Z Height	8.5 mm
Optical Window Dimensions	2 × 2.5 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	50 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Fabrication Method	Molded 83
Opening Configuration	Open Top
Pack Quantity	1 Piece
Package Contents	1 × Quartz Ultra-Micro Cuvette

Choose this option

Choose MQQMC051 when you need a straight-through UV/Vis cell with a small sample chamber and direct top access for pipetting. The 10 mm path keeps the familiar optical distance, while the 50 µL nominal capacity and small window area are better suited to methods built around compact sample loading and careful beam placement than to general large-volume cuvette handling.

What makes this option different

Open-top access allows direct filling, inspection and bubble checking from above.
10 mm path with 50 µL nominal capacity brings a standard optical path into an ultra-micro sample format.
Two-Way Light configuration supports straight-through optical access on the main opposing faces.
2 × 2.5 mm window area keeps the illuminated region compact and should be matched to your beam geometry.
8.5 mm Z Height helps when your holder or instrument has a defined beam-center position from the cell base.
Molded 83 construction is commonly selected for organic-solvent methods and applications that may involve heat.

Structure and dimensions

Using this cell

Fill from the open top and make sure the liquid fully covers the beam area in your actual measurement position. With a compact chamber like this, bubbles, droplets on the optical faces and inconsistent fill level can affect whether the beam passes cleanly through the sample.

Use the same orientation for blank and sample runs. Handle the cell by the upper body where possible, and keep the exterior optical faces clean and dry before measurement.

First-use check

Inspect the optical faces and chamber for chips, residue or visible contamination.
Place the cell in the holder and verify that the beam passes through the intended window area.
Run a blank in the same orientation you will use for the sample, then recheck for bubbles or exterior droplets.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

The body dimensions are 12.5 × 12.5 × 45 mm. Check holder clearance around the square body and confirm that your instrument beam aligns with the 8.5 mm Z Height and the small optical window area.

The 50 µL figure is a nominal capacity, not a stated minimum working volume. If your method is sensitive to beam size or fill height, check that your actual setup keeps the illuminated region fully within the filled sample.

English selection reference — Selection reference ↗

Solvents and cleaning

This cell uses Molded 83 construction, which is commonly selected for organic-solvent methods and applications that may involve heat. Choose the sample and cleaning routine for the actual liquids and handling conditions used with this cell.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the optical faces gently with suitable non-abrasive tissue, and avoid prolonged exposure to aggressive chemicals unless suitability has been checked for your process conditions.

Included with this option

1 Quartz Ultra-Micro Cuvette. The listed price is for one cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, opening details and fabrication or tolerance requirements. Send your drawing or holder details, beam position, sample conditions and required quantity for review.

Send a product-selection enquiry with SKU MQQMC051 and your application details.